Kenwood K-501USB Stereo System User Manual


 
24
English
Basic Operation
Increases
volume
Decreases
volume
1 2
3
3
Press the MUTE key again
(to return to the previous volume
level).
Preparations
Install the system in a proper location.
(See page 7.)
Prepare the remote control unit.
(See page 15.)
Adjusting the volume
Decreases
volume
Increases
volume
Adjust in the range from 0 to 40 (max.).
* Turning the knob quickly (on the main unit) or
holding a key depressed (on the remote control
unit) accelerates the volume variation speed.
Muting the audio temporarily
To cancel muting
Adjust the volume.
Inserting a memory card
Press the bottom edge of the
memory card slot to open the
cover.
1
Insert a memory card.
2
Close the memory card slot
cover.
3
* Be sure to set the system to the
standby mode in advance. For
details, refer to page 53 of the
“Operating Procedures”.
Be careful of orientation!
Hold and insert the card
so that the labeled side
faces down and the cut
corner comes on the left.
Check the connections.
(See pages 8 to 11.)