Kenwood K-501USB Stereo System User Manual


 
11
FM outdoor antenna
Use a 75-Ω coaxial cable, lead it indoors and
connect to the FM 75 Ω terminal. Remove the
simplified FM indoor antenna after connecting
the outdoor antenna.
AUX IN jacks
Connect to audio autput of an
auxiliary component such as a VCR
or a turntable incorporating an
RIAA equalizer amplifier (separately
available P-110).
D.AUDIO OUT (ANALOG) jack
SUB WOOFER PRE OUT jack
Connect the powered subwoofer
(separately available SW-40HT, etc.).
Caution for outdoor antenna installation
Memory card slot
Insert a memory card (separately
available).
(Refer to page 53 of the “Operating
Procedures”.)
R
L
Since antenna installation necessitates skill
and experience, always consult your dealer
before installation. The antenna should
be placed at a distance from the power
distribution wires. Otherwise, an electric
shock accident may occur if the antenna
falls down.
Connect a digital audio player with
direct encoding capability using a
commercially cord with stereo mini
plugs. Note that the D.AUDIO OUT jack
outputs an analog signal.