Kenwood HM-335 Stereo System User Manual


 
Various CD playback features
29
EN
Select "PGM" mode.
Select track numbers in the order you want to play them.
Start playback.
Select the CD input.
÷ Up to 32 tracks can be programed. When "PGM FULL" is
displayed, no more tracks can be programed.
÷ If you made a mistake, press the CLEAR key and enter
the track No. again.
÷ When a track No. is entered, the track will be added to
the end of the existing program.
÷ When the total time of CD program is 200 minutes or
more, the time display shows "
-
-
:
-
-
".
1 Select the track.
2 Confirm the selection.
(Go to step 2 within 20 seconds.)
Press the numeric keys as shown below....
To select track No. 23 :
10 10
,,
3
To select track No. 30 :
10 10 10
,,,
0
Various CD playback features
Use the following procedure to program desired tracks in a desired order. (up to 32 tracks)
1
2
3
Program position of the
track to be selected next.
(To select more than one track, repeat steps 1 and
2 for each track.)
÷ Tracks will be played in the order they were pro-
gramed (following the program numbers).
÷ When the 4 key is pressed once during playback,
the track being played will be played from the
begining.
To skip further to a track preceeding the current track,
press the 4 key twice repeatedly.
÷ When the ¢ key is pressed during playback, play will
skip to the next track in the program.
Press in stop mode
Listening to the desired sequence
(program playback)
6
CD
SET
5
2
8
0
6
3
9
4
1
7
10
PGM
PGM
PGM