Filter
Top Products
System connection
11
EN
1 Headphone jack %
Connect headphone with a stereo mini-plug
(optionally available).
2 BEAT CANCEL switch ¶
3 0 CD lid ^
To load or eject a CD, press the area marked 0 push
open on the CD lid to open it.
4 Display panel
5 volume knob $
Turn this knob for volume adjustment.
6 4 and ¢ multi control keys
In the normal mode, these are used to
– skip CD tracks
&
– fast forward or rewind tape (
– select a preset radio station )
In the menu mode (selected by pressing the mode key),
press these buttons to select the desired menu item. To
set or enter setting of the menu item, press the set/sound
key.
• Pressing these (multi control keys) switches the dis-
play contents.
"TAPE RVS"
(
"AUTO PRESET ?" or "AUTO MEMORY ?" ¡
(Only when the TUNER input is selected)
"INPUT ?"
fl
(Only when the AUX input is selected)
"TIMER ?"
·
"TIME ADJUST ?" ‡
"APS ?" 9
• The function of these keys returns to the normal mode
when they have not been operated for 20 seconds.
7 Tuning Mode key
CD, TAPE : &(
Press to stop a disc or tape operation.
TUNER :
™
Press to switch between the AUTO (auto tuning,
stereo reception) and MONO (manual tuning,
monaural reception) modes.
Standby mode:
Press to display the clock.
Each press switches the mode.
Clock display on
Clock display dimmed
Clock display off
7 Cassette holder *
To load or eject a cassette tape, press the area marked
0 push open on the cassette holder to open it.
8 Basic operation keys
AUX key fl
Press to reproduce the external source component
connected to the AUX (analog auxiliary input) jacks.
TUNER /band key )
Press to select the TUNER input.
This key is also used to select the received broadcast
band.
CD 6 key ^
Press to select the CD input and start playback. During
CD playback, press to pause.
TAPE 2 3 key *
Press to select the TAPE (cassette deck) input and
start playback of a tape. Pressing this key during tape
playback switches the tape transport direction.
9 POWER key (For U.S.A. and Canada) $
key (For other countries) $
Press to set the unit to On or Standby.
standby/timer indicator
Lights up when the unit is set to the Standby mode of
power.
Red : Ordinary standby.
Green : Timer standby.
Off : The unit is On.
0 Remote sensor #
This window receives signals from the remote control
unit.
! rec key ¶
Press to start tape recording. Pressing this key during
recording initiates record-pause after leaving a no-
sound blank of about 4 seconds.
@ mode key 9
Press to switch the function of the 4 and ¢ keys to
menu select mode. Press again to reset the function of
the 4 and ¢ keys to normal mode.
# set/sound key 9
Press to select EX. BASS or LOUD sound effect or
press to set or enter an item selected with the 4 and
¢ keys.
Controls and indicators
\
\
\
\
mode
set/sound