Filter
Top Products
Connecting Wires to Terminals
■
If you want to connect the Controller
HD Radio tuner
Controller unit (optional accessory) input
FM/AM antenna
• When the controller unit is connected, you cannot
use this "TO SLAVE UNIT" input terminal.
(Front side)
(Rear side)
Car Audio unit
Audio output
(Left: White, Right: Red)
Power cable input
(optional accessory)
Audio input
Antenna cable
(Accessory6)
HEAD UNIT
TO SLAVE UNIT
TO
CHANGER 2
TO
CHANGER 1
TO
H/U
TO
SWITCH
AUX
OFF ON
SWITCH
PROTOCOL
ON
IN
AUX
]“N”
• Please keep the total extension of the control cable from the control unit to the disc changer to 13 m or less. Control
cable lengths in excess of 13 m will cease to function properly.
• When connecting multiple units (such as the CD Changer and KCA-S210A), connect the KTC-HR100TR/ KTC-HR100MC
directly to the control unit.
• Set the PROTOCOL selection switch to "N" position.
Disc changer
Control unit
■
If you want to connect KCA-S210A
HD Radio tuner
KCA-S210A
12
|
English