Filter
Top Products
English
|
13
Adjusting the detail of Audio
Control
Among the Basic Audio items, you can adjust the
Bass level, Middle level, and Treble level in detail.
1 Select the Basic Audio item
Select the desired item to be set in detail from
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see <Audio
Control> (page 12).
2 Enter Detail adjustment mode of Audio
Control
Press the [VOL] knob for at least 1 second.
3 Select the Detail Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4 Adjust the Detail Audio item
Turn the [VOL] knob.
Bass level
Adjustment Item Display Range
Bass Center Frequency "Bass FRQ"/
"BAS F"
40/50/60/70/80/100/
120/150 Hz
Bass Q Factor "Bass QFactor"/
"BAS Q"
1.00/1.25/1.50/2.00
Bass Extend "Bass EXT"/
"B EX"
OFF/ON
Middle level
Adjustment Item Display Range
Middle Center Frequency
"Middle FRQ"/
"MID F"
0.5/1.0/1.5/2.0 kHz
Middle Q Factor "Middle
QFactor"/
"MID Q"
1.00/2.00
Treble level
Adjustment Item Display Range
Treble Center Frequency
"Treble FRQ"/
"TRE"
10.0/12.5/15.0/17.5 kHz
5 Exit the Detail Audio Control mode
Press the [VOL] knob for at least 1 second.
• When you set the Bass Extend to ON, low frequency
response is extended by 20%.
• You can exit the Audio Control mode at anytime
by pressing any button except for [VOL] and [ATT]
buttons.