Kenwood DM-SE7 Stereo System User Manual


 
R-SE7/DP-SE7/X-SE7 (En)
55
Preparation section Basic section Application section Knowledge section
Specifications
Receiver (R-SE7)
[Amplifier section]
Rated power output
Class AB operation
20 watts per channel minimum RMS, both chan-
nels driven, at 6 , 1 kHz with no more than 10 %
total harmonic distortion.
(DIN) 1 kHz at 6 , 0.7 % T.H.D............ 15 W + 15 W
Class A operation
7.5 watts per channel minimum RMS, both chan-
nels driven, at 6 , 1 kHz with no more than 10 %
total harmonic distortion.
Total harmonic distortion...... 0.02% (1 kHz, 10 W, 6 )
Frequency response .........20 Hz ~ 40 kHz, +0 dB, -3 dB
Input sensitivity / Impedance
.......................................................... 200 mV / 47 k
Output level / Impedance
SUPER WOOFER PRE OUT................... 2.0 V / 1 k
TAPE REC ........................................... 200 mV / 1 k
Signal to noise ratio
............................................................. 96 dB (IHF’66)
[FM Tuner section]
Tuning frequency range ............... 87.5 MHz ~ 108 MHz
Usable sensitivity (DIN)
MONO
.. 1.2 µV (75 ) / 13.2 dBf (40 kHz DEV., S/N 26 dB)
Signal to noise ratio
(DIN weighted at 1 kHz, 65.2 dBf input)
MONO .............................................................. 65 dB
STEREO ............................................................ 58 dB
Selectivity (DIN ±300 kHz) ................................... 64 dB
Stereo separation (DIN at 1 kHz) ........................ 35 dB
[AM Tuner section]
Tuning frequency range ................ 531 kHz ~ 1,602 kHz
Usable sensitivity (30% mod., S/N 20 dB)
.................................................... 15 µV / (500 µV/m)
Signal to noise ratio (at 30% mod., 1 mV input)
........................................................................... 48 dB
Output level / Impedance (30% mod., 1 mV input)
............................................................... 0.18 V / 1 k
General
Power consumption.............................................. 45 W
Dimensions .................................................. W: 200 mm
H: 77 mm
D: 278 mm
Weight (net) .......................................................... 3.0 kg
Notes
Notes
1.KENWOOD follows a policy of continuous advancements in development. For this reason specifications may
be changed without notice.
2.Sufficient performance may not be possible at very low temperatures (0°C or less).
CD player (DP-SE7)
Laser ............................................. Semiconductor laser
Playing rotation.................... 200 rpm ~ 500 rpm (CLV)
Frequency response ................. 4 Hz ~ 20 kHz, ±1.0 dB
Signal to noise ratio......................... More than 100 dB
Dynamic range ....................................More than 95 dB
Total harmonic distortion
.................................... Less than 0.005 % (at 1 kHz)
Channel separation .......... More than 92 dB (at 1 kHz)
Wow & Flutter ............................. Unmeasurable Limit
Output level / Impedance
Fixed ........................................................ 1.2 V / 1 k
Digital output
Optical ...................................... –15 dBm ~ –21 dBm
(wave length 660 nm)
General
Power consumption.............................................. 10 W
Dimensions .................................................. W: 200 mm
H: 77 mm
D: 249 mm
Weight (net) .......................................................... 2.0 kg
Cassette deck (X-SE7)
Track ...................................... 4-track, 2-channel stereo
Recording system ................................ AC bias system
(Frequency: 105 kHz)
Heads
Playback / recording head...................................... 1
Erasing head ............................................................ 1
Motors........................................................................... 1
Wow and flutter ................................. 0.1 % (W.R.M.S.)
Fast winding time ...................... Approx. 110 seconds
(C-60 tape)
Frequency response
TYPE I tape .................... 40 Hz to 18,000 Hz, ±3 dB
TYPE IV tape ................. 40 Hz to 19,000 Hz, ±3 dB
Signal to noise ratio
Dolby B NR ON............................ 67 dB (CrO2 tape)
Dolby C NR ON............................ 73 dB (CrO2 tape)
Dolby NR OFF .............................. 60 dB (CrO2 tape)
Input sensitivity / Impedance............ 77.5 mV / 47 k
Output level / Impedance ................... 775 mV / 10 k
General
Power consumption.............................................. 14 W
Dimensions .................................................. W: 200 mm
H: 77 mm
D: 249 mm
Weight (net) .......................................................... 2.2 kg