Kenwood DM-SE7 Stereo System User Manual


 
R-SE7/DP-SE7/X-SE7 (En)
39
Preparation section Basic section Application section Knowledge sections
R.D.S.
RDS is a system which transmits useful
information (digital data) for FM broadcasts
together with the broadcast signal. Tuners and
receivers designed for RDS reception can extract
the information from the broadcast signal for use
with various functions such as automatic display
of the station name.
R.D.S.
(Radio Data System)
This unit is equipped with the following
functions utilizing RDS data:
PTY (Program Type Identification) Search :
The tuner automatically searches for a station which is
currently broadcasting a specified program type (genre).
PS (Program Service Name) Display : (See below.)
When an RDS broadcast is received, the station name is
automatically displayed.
EON (Enhanced Other Network) : w
When the information to be received is set in advance and
any RDS station in the same network starts broadcasting
of such information, the reception automatically will be
switched to that station.
The “RDS” indicator lights up when
an RDS broadcast (signal) is received.
* Some functions may not be provided or be given
different names depending on countries or areas.
To switch the display contents
RDS
DISPLAY
Pressing the DISPLAY key
changes the display contents.
Display mode priority ranking
1 PS (Program Service Name) Display :
When an RDS broadcast is received, the
station name is automatically displayed.
If no PS data was sent, “NO PS” is dis
played.
2 Frequency Display :
The frequency of the current station is displayed.
For reception of RDS stations, the RDS auto
presetting function must be used to preset the
stations.
“NO DATA” will be flashed when a station not
preset by auto presetting is received.
BBC 1 FM
TUNEDST.AUTO RDS
BBC 1 FM
TUNEDST.AUTO RDS
FM 1)2 5).
TUNEDST.AUTO RDS
MHz
Lights