Kenwood DM-SE7 Stereo System User Manual


 
R-SE7/DP-SE7/X-SE7 (En)
29
Preparation section Basic section Application section Knowledge sections
Recording
An unrecorded section of about 4 sec is pro-
duced (auto recording mute)
Temporary stop during recording
÷ The recording level is adjusted automatically when the
CRLS function is used. º
÷ Recording stops automatically when the tape side(s) to
be recorded have been fully recorded.
÷ Recording pause condition is reached after approxi-
mately 4 sec.
1 Play (or tune) the input
source to be recorded.
2 Start recording.
4. Select the source to be recorded.
5. Start recording.
÷ When the CD input is selected and if a disc has been set
in the CD player, its playback starts immediately.
The input source component to be recorded
should be displayed.
To interrupt recording
An unrecorded section of about 4 sec is produced
directly after the recording has been interrupted.
÷ Press the record key to restart recording.
Select an input source other than
“TAPE” input.
÷ An unrecorded section of about 4 sec is produced and
recording pause condition is reached.
1 Obtain stop condition.
2 Press the record key twice.
About
4 sec
To end recording
R-SE7
Lights
8
8
8
7
8
input selector
44
55
CD