Kenwood DM-SE7 Stereo System User Manual


 
R-SE7/DP-SE7/X-SE7 (En)
15
Preparation section Basic section Application section Knowledge sections
Controls and indicators
Receiver R-SE7
1 “on/standby” key *
The power is switched ON and OFF (standby). At the
time of system connection, the power is switched ON
and OFF for the entire system.
2 “phones” jack (
Headphones with a stereo mini plug (optional) can be
connected.
3 “volume control” knob *
Normally, this is used to adjust the volume. It is also
used for timer reservation and clock setting.
4 Pure A indicator e
This lights at the time of pure A mode.
5 “pure A” key (e
When the power is ON : Switches Pure A mode ON/
OFF.
When the power is OFF: Switches A.P.S. (auto power
save) ON/OFF.
6 N.B. key (
This is used for bass and treble compensation.
CD player DP-SE7
1 Disc tray )
One disc can be stored.
2 Remote control sensor
This is not used with system connection.
3 “on/standby” key
The power is switched ON and OFF (standby). This is
not used with system connection.
4 Open/Close key (0) )
The disc tray is opened and closed.
Cassete deck X-SE7
1 Tape tray
This houses the cassette tape.
2 “on/standby” key/Standby indicator
The power is switched ON and OFF (standby). This is
not used in case of system connection.
3 Dolby NR key/indicators £
Dolby noise reduction ON/OFF switching is executed.
4 Playback keys (2 3)/Operation indicator
During stop and pause: the tape direction lights red.
During playback and recording: the tape direction lights
green.
During fast forward and rewind: the tape direction
flashes green.
5 Open/Close key (0)
This opens the tape tray for tape insertion and removal.
6 Stop (7) key £
7 “enter” key ¶r
Used for time setting, timer setting, presetting RDS
stations, storing radio stations etc.
8 “input selector" key *
This selects the input source. When TAPE, CD, or MD
is selected and a tape or disc already has been set,
playback starts automatically.
9 “tuning” (% fi) key §ti
When the power is ON : Used for station tuning.
When the power is OFF: Used for timer reservation.
%key: Program ON/OFF
key: O.T.T. reservation
0 “band” key §i
When the power is ON : Reception band switching.
When the power is OFF: Used for timer reservation.
! “auto/mono” key ¶r
When the power is ON : The tuning mode is switched.
When the power is OFF: Used for clock setting.
@ Remote control sensor &
This is used with the R-SE7 system remote control
(RC-SE9).
7 Pause (8) key/indicator £
8 Record () key/indicator
Recording is started. When this switch is pressed
during recording, an unrecorded (blank) portion of about
4 sec is produced and then the tape stops.
9 Fast forward and rewind (1 ¡) keys £
0
rev. mode key/indicator £
The reverse mode of the deck (both sides, one side) is
switched.
! CRLS key/indicator º
The recording level is set automatically according to the
sound source being recorded.
5 Playback/Pause key (6) )
6 “repeat” key
This is used for repeated playback of a CD.
7 Stop (7) key ¡
8 Skip (4 ¢) key ¡
9 Fast forward, rewind (1 ¡) key ¡
0 “time” key ¡
The CD time display is switched.
! space key ¤
During program playback, a silent part of several sec-
onds is produced between tracks.