Filter
Top Products
10
unpacking
Carefully unpack your system. Save all packing materials, which provide the safest way to transport your system as needed.
WARNING:
To avoid danger of suffocation, keep the plastic bags out of the reach of children.
If any part of the system appears damaged, do not attempt to use it. Notify your authorised dealer immediately.
Check to be sure your system includes the parts shown (page 1).
Note:
Please make a note of the serial numbers on the bottom of the DVD unit and the rear of the subwoofer. Copy those numbers onto your
warranty card and in the space provided below.
For your records
Serial numbers are located on the bottom of the DVD unit and the rear of the Subwoofer module.
DVD unit serial number: ______________________________________________________________________________________
Subwoofer module serial number: ________________________________________________________________________________
Dealer name: ______________________________________________________________________________________________
Dealer phone: ______________________________________________________________________________________________
Purchase date: ______________________________________________________________________________________________
User defined DVD parental code: ________________________________________________________________________________
We suggest you keep your sales receipt and warranty card together with this owner’s guide.
English instructions
video connection setup
Selecting the correct input on your TV
The KEF Instant Theatre on-screen displays will only be present on your TV screen if the TV’s external input is properly set to the correct input
which is connected to the DVD player.The video input selection is most commonly made on televisions by pressing the TV’s remote control
button marked ‘TV/Video’,‘Input’,‘AV in’ or ‘Aux’.
Selecting Component and Progressive DVD output
When using the component video connection to your TV (whether progressive or not) you must connect the composite video connection as
well to allow you to set the component option while the default DVD output is composite only. Once you have selected the component option
in the DVDs video settings menu change the TVs input source to compontent and then select progressive if supported by your TV.
Video loop-through
The KEF Instant Theatre only plays composite video inputs on the composite vido output and only plays SVideo inputs on the SVideo output.You
will therefore need a composite or an SVideo lead if you are using these as video sources.
Record and Multi-room audio outputs
Stereo mode must be selected in the Audio menu when using the left and right Record/Multi-room output on the back of the subwoofer to turn
the surround sound off.
K7190>KIT100 Manual USA 19/4/04 4:11 pm Page 11