15
Timer recording of broadcast
● The current time must be set before the timer can be used.
● Make sure that the safety tabs of the cassette have not been broken off.
Operations
~ Set the button to ON.
Ÿ Load a cassette.
● Insert the cassette with the side to be recorded facing out.
● Select the required reverse mode. ( or )
! Set the timer. (Refer to “Setting the timer” on page 14.)
● Set the timer about a minute before the broadcast to be recorded
is scheduled to start.
⁄ Tune to the station to be recorded. (Refer to page 13.)
@ Set the button to STANDBY.
● Timer recording will start at timer start time and the power will
be switched off at timer stop time. (The timer mode is then re-
leased.)
● To cancel timer operation
Press the TIMER/SNOOZE button for more than 2 seconds so that
the timer mode indicator ( ) goes out.
If you do this, timer recording will not start at the timer start time.
Notes:
Once the timer has been set, the start and stop times, etc., are stored
in memory. When timer recording or playback is required at different
times, the timer must be set again.
● After setting the timer start and stop times, check that the tuner is
tuned to the required frequency.
● When the power cord is disconnected or there is a power failure, timer
settings will be erased from memory. If this happens, set the current
time and perform the timer setting again.
Timer playback
● Timer playback of tapes, broadcasts and CDs is possible.
Operations
~ Set the button to ON.
Ÿ Set the timer. (Refer to “Setting the timer” on page 14.)
Source sound
CD play
Tape playback
Broadcast
Timer mode
CD
TAPE
TUNER
Operations
Load a disc.
Load a cassette tape.
Tune to the required station.
● To cancel timer operation
Press the TIMER/SNOOZE button for more than 2 seconds button so
that the timer mode indicator ( ) goes out.
Notes:
● When the volume setting is set to “VOLUME -” (volume level is not
specified), the timer playback volume is set to the level used before
setting the timer.
● To stop during timer playback, press the button to switch the unit
off.
●To get an extra 5 minutes of sleep....
When timer playback starts, press the TIMER/SNOOZE button.
The power is switched off and timer playback restarts after 5 min-
utes (snooze function).
TIMER/SNOOZE
! Set the button to STANDBY.
● Timer playback will start at the timer start time and the power will be
switched off at the timer stop time.
The unit remains in the same timer mode even after the power is
switched off. The same timer function will repeat at the same time on
the following day.
● When the power is switched on, it is possible to fade in the sound
from volume level 0 (zero) to the preset volume.
COMPACT
DIGITAL AUDIO
BAND
ONE TOUCH
REC
TAPE
OPEN
CD
TUNER
TIMER/SNOOZE
STANDBY
AUX
MICRO COMPONENT SYSTEM UX-T550
VOLUME
M
U
L
T
I
J
O
G
ACTIVE HYPER
BASS PRO
CLOCK
AUTO REVERSE
AUTO TAPE SELECTOR
~
@
Ÿ
⁄
!
COMPACT
DIGITAL AUDIO
BAND
ONE TOUCH
REC
TAPE
OPEN
CD
TUNER
TIMER/SNOOZE
STANDBY
AUX
MICRO COMPONENT SYSTEM UX-T550
VOLUME
M
U
L
T
I
J
O
G
ACTIVE HYPER
BASS PRO
CLOCK
AUTO REVERSE
AUTO TAPE SELECTOR
~
!
Ÿ
UX-T550(B)_body.pm6 12/12/00, 3:11 PM15