Filter
Top Products
9
Daily Operations—Playback
In this manual, operations using the remote control
are mainly explained; however, you can use the buttons
and controls on the main unit if they have the same (or
similar) name and marks.
1 Turn on the power.
The STANDBY lamp on the main unit turns off.
• Instead of pressing
, the System is turned on by
pressing one of the source buttons.
2 Select the source.
• Playback automatically starts if the selected source
is ready.
• For disc/USB: see page 11.
• For FM/AM: see page 10.
• For TV: see page 12.
• For AUDIO IN: see page 13.
• You can change the display information by pressing
DISPLAY. For details, see page 17.
3 Adjust the volume.
To turn off (standby) the System
The STANDBY lamp on the main unit
lights in red.
• A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on
the main unit. The sound will no longer come out of the
speakers. The HP indicator lights up on the display. Be
sure to turn down the volume before connecting or
putting on the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System
with the volume set at an extremely high
level; otherwise, the sudden blast of sound
may damage your hearing, speakers and/or
headphones when you turn on the System or
start playback.
How to select a number
Examples:
To select number 5, press 5.
To select number 10, press 10.
To select number 15, press
10,
1, then 5.
To select number 30, press
10
3, then 0.
To select number 125, press
10 twice (the underbar of the
hundred digit on the display
flashes), 1, 2, then 5.
Remote control
Number
buttons
UX-L5V[U]6th.indb 9UX-L5V[U]6th.indb 9 09.4.2 11:08:31 AM09.4.2 11:08:31 AM