Filter
Top Products
– 46 –
English
FORM GR? ENTRY GR?
DIVIDE GR?
UNGROUP?UNGR ALL?
ERASE GR?
Canceled
JOIN GR?
MOVE GR?
GR 1 TITLE?
Ungrouping Tracks — UNGROUP
This function allows you to dissolve a single group.
You cannot erase the tracks using this function.
Once tracks are ungrouped, the other groups are renumbered.
• To stop any time during editing process, press
MD TITLE INPUT/EDIT.
On the remote control ONLY:
1
Insert an MD to edit.
2
Press MD TITLE INPUT/EDIT repeatedly while
pressing MD GROUP to select “UNGROUP?”
The source changes to “MD.”
• Each time you press MD TITLE INPUT/EDIT while
pressing MD GROUP, the group editing mode
changes as follows:
• If you want to stop this editing process, press CANCEL.
3
Press SET.
4
Press ¢ or 4 to select a group to be ungrouped.
• During playback:
The tracks in the selected group are played back repeatedly.
5
Press SET.
“<UNGROUP>” appears on the display.
• To cancel the setting, press CANCEL, then repeat step
4
.
6
Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the
display while the editing you have made is being
recorded on the MD.
FORM GR? ENTRY GR?
DIVIDE GR?
UNGROUP?UNGR ALL?
ERASE GR?
Canceled
JOIN GR?
MOVE GR?
GR 1 TITLE?
7
Press SET.
“<MOVE GR>” appears on the display.
• To cancel the setting, press CANCEL, then repeat step
4
.
8
Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the
display while the editing you have made is being
recorded on the MD.
Moving a Group — MOVE GR
This function allows you to move a group.
Once a group is moved, the tracks and the other groups are
renumbered.
• To stop any time during editing process, press
MD TITLE INPUT/EDIT.
On the remote control ONLY:
1
Insert an MD to edit.
2
Press MD TITLE INPUT/EDIT repeatedly while
pressing MD GROUP to select “MOVE GR?”
The source changes to “MD.”
• Each time you press MD TITLE INPUT/EDIT while
pressing MD GROUP, the group editing mode
changes as follows:
• If you want to stop this editing process, press CANCEL.
3
Press SET.
4
Press ¢ or 4 to select a group you want to move.
• During playback:
The tracks in the selected group are played back repeatedly.
5
Press SET.
• To cancel the setting, press CANCEL, then repeat step
4
.
6
Press ¢ or 4 to select the position where you
want to move the group.
• During playback:
The tracks in the selected group are played back repeatedly.
• To cancel the setting, press CANCEL, then repeat step
4
.
Continued
EN40-47UX-F70MD[UB]_f 01.7.10, 5:20 PM46