Filter
Top Products
– 43 –
English
Forming a Group — FORM GR
This function allows you to form a group from a series of
tracks which do not belong to the other groups. You can
form a group from a single track.
Once a new group is formed, the other groups are
renumbered.
• You can form up to 99 groups on a single MD.
• To stop any time during editing process, press
MD TITLE INPUT/EDIT.
On the remote control ONLY:
1
Insert an MD to edit.
2
Press MD TITLE INPUT/EDIT repeatedly while
pressing MD GROUP to select “FORM GR?”
The source changes to “MD.”
• Each time you press MD TITLE INPUT/EDIT while
pressing MD GROUP, the group editing mode
changes as follows:
• If you want to stop this editing process, press CANCEL.
3
Press SET.
4
Press ¢ or 4 to select the first track of a new
group.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
• During playback:
The selected track starts playback repeatedly.
FORM GR? ENTRY GR?
DIVIDE GR?
UNGROUP?UNGR ALL?
ERASE GR?
Canceled
JOIN GR?
MOVE GR?
GR 1 TITLE?
5
Press SET.
• “GROUP TRACK” appears when the track is already
in a group.
• To cancel the setting, press CANCEL, then repeat
step
4
.
6
Press ¢ or 4 to select the last track of a new
group.
• You can select the track using number buttons. In this
case, the selected track starts playback repeatedly.
• During playback:
The selected track starts playback repeatedly.
• “GROUP TRACK” appears when the track is already
in a group.
7
Press SET.
“<FORM GR>” appears on the display.
• To cancel the setting, press CANCEL, then repeat
step
4
.
8
Press ENTER to finish the editing procedure.
“EDITING” then “UTOCwriting” appears on the
display while the editing you have made is being
recorded on the MD.
To ungroup the tracks, see the UNGROUP function on
page 46.
To form a group while recording, see “Before recording
on an MD” on page 32.
The first track
The last track
EN40-47UX-F70MD[UB]_f 01.7.10, 5:20 PM43