JVC UX-A70MD Stereo System User Manual


 
– 29 –
English
Recording the External Equipment
— Sound Synchronized Recording
With this recording method, you can start recording
automatically when the source sound comes into this unit
through the LINE IN jacks.
Sound synchronized Recording will stop automatically if
no sound comes into for more than 30 seconds.
You have three methods (MODE 1 – 3) to record from the
external equipment onto an MD.
* For the recording length mode, see “Stereo Long-Hour
Recording (MDLP)” on page 27.
On the main unit ONLY:
1
Insert a recordable MD into the MD loading slot.
If the MD playback starts, press 7 to stop it.
2
Press AUX.
The source is changed to “AUX.”
3
Press REC MODE to select the recording mode.
Each time you press the button, the recording modes
change as follows:
4
Press REC.
“AUX Ready” appears in the main display.
5
Start playback on the external equipment.
Sound synchronized recording starts automatically
when the sound comes into this unit.
To put a track mark manually while recording, press
SET on the remote control at the place you want.
To stop recording, press 7.
“UTOCwriting” flashes for a while.
4
Press REC.
The recording starts.
After the recording, both the CD player and the MD
recorder stop automatically.
To stop recording, press 7.
“UTOCwriting” flashes for a while.
To record a single track during play or pause
While playing back or pausing a CD track you want to
record, perform steps
3
and
4
.
The playback of that CD track is stopped, and the same
track starts playing from the beginning again. This time, the
MD recorder starts recording the CD track.
When the track is recorded, both the CD player and the
MD recorder stop.
When recording from a CD
Two track marks may be recorded at the beginning of the
recording. If this occurs, join these two track marks using the JOIN
function described on page 32.
The now recorded track number
The track number on the MD is flashing while
recording.
Flashing
Elapsed playing
time
Recording length and speed
Ex. The track 4 of a CD is now recorded on the track 1
of an MD with MODE 2 (LP2, NORMAL SPEED
REC) selected.
Recording
length mode*
Recording Speed
Recording
mode
MODE 1 SP NORMAL SPEED REC
MODE 2 LP2 NORMAL SPEED REC
MODE 3 LP4 NORMAL SPEED REC
TRACK
NORMAL SPEED REC
CD
MD
LP2SP LP4
1
MODE 1
MODE 2
MODE 3
AUX
(canceled)
EN25-29.UX-A70MD[USUBUJ]_f 00.12.4, 4:31 PM29