Filter
Top Products
– 11 –
English
Turning On the Power
When you press the play button (CD # / 8, MD # / 8) for
a particular source or the source selecting buttons such as
FM/AM and AUX, the unit automatically turns on (and
starts playback if the source is ready).
To turn on the unit without playing, press .
The STANDBY/ON lamp on the main unit lights green.
“HELLO” appears in the main display.
To turn off the unit (on standby), press again.
“SEE YOU” appears in the main display.
The STANDBY/ON lamp on the main unit lights red.
• “0:00” appears in the main display until you set the
built-in clock. After setting the clock, the clock time will
appear in the main display while the power is off.
• A little power is always consumed even while the unit is
in standby mode.
To set the built-in clock, see page 39.
To switch off the power supply completely, unplug the
AC power cord from the AC outlet.
When you unplug the AC power cord or if a power
failure occurs
The clock setting, the tuner preset stations and other settings will
be erased.
Selecting the Sources and Starting Play
To select the tuner as the source, press FM/AM.
The unit automatically turns on (when the unit is in
standby), and “FM” or “AM” appears in the main display
for a while.
The unit starts to tune in the last received station.
• For more detailed operations, see pages 14 to 16.
To select the CD player as the source, press CD # / 8.
The unit automatically turns on (when the unit is in
standby), and “CD” appears in the main display for a while.
• Play will start if a CD is on the disc tray.
• “CD NO DISC” will appear in the main display if a CD
is not loaded.
To stop playback, press 7.
• For more detailed operations, see pages 17 to 20.
To select the MD player as the source, press MD # / 8.
The unit automatically turns on (when the unit is in
standby), and “MD” appears in the main display for a
while.
• Play will start if an MD is in the MD loading slot.
• “MD NO DISC” will appear in the main display if an
MD is not loaded.
To stop playback, press 7.
• For more detailed operations, see pages 21 to 24.
To select the external equipment as the source, press
AUX.
The unit automatically turns on (when the unit is in
standby), and “AUX” appears in the main display for a
while.
• For operating the external equipment, see the manuals
supplied with them.
EN10-13.UX-A70MD[USUBUJ]_f 00.12.4, 4:30 PM11