Filter
Top Products
11
Selecting the speaker position
mode
For optional speaker layout ( 6), change the speaker
position mode.
1 Turn off the System. ( 10)
2
3 Select “S.SPK R.”
As the speaker position mode is changed, the
following settings are also changed automatically:
– The output level settings of the speakers and of
subwoofer (see the right column) are initialized.
– The surround mode ( 12) is set to “AUTO
SUR.”
Adjusting the output level of the
speakers and subwoofer
1
2 Adjust the output level.
Different output level settings can be stored for the
two groups of sources—FM/AM and the others.
You can also make adjustments from the LEVEL
menu ( 24) when the speaker position mode is
“S.SPK R.”
Adjusting the bass and treble
sounds
1
2 Adjust the level.
Sound settings and adjustments
Set the remote
control mode
before operation.
«Hold
S.SPK F
(Surround
speaker: Front)
Initial setting
• The F indicator
lights on the display.
S.SPK R
(Surround
speaker: Rear)
For optional speaker
layout
• The R indicator
lights on the display.
• When the speaker position mode is “S.SPK F”:
• When the speaker position mode is “S.SPK R”:
The items you can adjust differ depending on
the selected speaker position mode (see the
left column).
CENTER = SURR = SUBWFR = (back to
the beginning)
FRNT L = FRNT R = CENTER = SURR L
= SURR R = SUBWFR = (back to the
beginning)
TRE Adjusts the treble sound
BASS Adjusts the bass sound
Sound and monitor settings
TH-D51[B]EN.book Page 11 Friday, August 3, 2007 10:26 AM