Filter
Top Products
11
How to use the number buttons
To select 3: Press 3.
To select 10: Press 10.
To select 14: Press h 10, 1, then 4.
To select 24: Press h 10, 2, then 4.
To select 40: Press h 10, 4, then 0.
To select 114: Press h 10, h 10, 1,
1, then 4.
Set the remote control
mode before
operation.
Listening with headphones
When the headphones are connected, the System
automatically deactivates the speakers and cancels the
surround mode ( 14) temporarily.
• “H.PHONE” appears on the display.
STANDBY lamp:
• Goes off when the System is turned on.
• Lights when the System is turned off.
Point at the remote sensor
directly.
Display
To change the display
brightness
A Digital audio signal format indicators
B Tuner band indicators ( 28)
C Lights when one of the surround modes is activated.
( 14)
D Frequency unit indicators for FM/AM
E Source signal and speaker signal indicators
(front left), (center), (front right), (low
frequency effect), (surround left), (surround
right), (monaural surround): Light when the signal
comes in for the digital input or when the System is
ready to receive the signal for the analog input.
SW (subwoofer): Always lights.
_: Lights while reproducing the channel’s sound
through the corresponding speaker.
F Speaker position mode indicators ( 13)
G Lights when both the System and the TV (with HDMI
connection) are ready to communicate each other.
H Scanning mode indicators ( 15)
HD: Lights when the System is emitting high-definition
video signals (720p or 1080i).
PRGR.: Lights when the progressive scanning mode is
activated.
I Digital device indicators
J File type indicators
K Lights when the chapter (CHAP.) or track (TRK)
number is displayed.
L Lights when selecting a program number (PG) or
playlist number (PL) of a DVD VR disc by using
TITLE/GROUP. ( 19)
M Special playback indicators for DVD Audio
( 22)
BONUS: Lights when a bonus group is detected.
B.S.P: Lights when browsable still pictures are
detected.
N FM reception mode indicators ( 28)
MONO: Lights when receiving an FM stereo station in
monaural.
ST: Lights when receiving an FM stereo station with
sufficient signal strength is tuned in.
O Lights during program play (PRG) or random play
(RND). ( 20)
P Lights when the System memorizes the position where
the playback is interrupted. ( 18)
Q Lights when the Karaoke function is activated.
( 29, 30)
R
Repeat mode indicators ( 20, 23)
Be sure to turn down the volume
before connecting or putting on the
headphones.
Basic and common operations
TH-D7D5[U]EN.book Page 11 Wednesday, June 13, 2007 10:19 AM