Filter
Top Products
EN
41
* The default setting is bold in the table below.
Ⅵ S-VHS ET
ON
OFF
Refer to page 37 for setting procedures.
This function allows you to record on VHS tapes with S-VHS picture
quality. Tapes recorded using this function can be played back on a VCR
equipped with the S-VHS ET function. The S-VHS indicator lights up on
the front display panel when "S-VHS ET" is set to "ON".
NOTES:
●
Before recording, make sure that “VIDEO CALIBRATION” is set to “ON”. (
੬
pg. 37,
38)
●
You cannot activate the S-VHS ET function...
– while recording is in progress.
– while timer-recording is in progress.
– while Video Calibration (
੬
pg. 38) is in progress.
●
S-VHS ET does not work with S-VHS tapes.
●
To keep the highest quality recording and playback pictures over a long period of
time, S-VHS recording on S-VHS tapes is recommended.
●
Use of high grade tapes are recommended for S-VHS ET recordings.
On some tapes, picture quality will not improves even if the S-VHS ET function is
used. Check the recording quality before you start important recordings.
●
You can play back S-VHS ET recordings on most of S-VHS VCRs and of VHS VCR
equipped with SQPB (S-VHS QUASI PLAYBACK) function. (Notice some VCRs are
not compatible with this function.)
●
While playing back a tape recorded with this function on some tapes, noise may
appear. (If playback picture becomes blurred or interrupted, use a cleaning cassette.)
●
During special effect playback (
੬
pg. 26), noise may appear. If special effect
playback is performed frequently on a tape recorded with this function, the tape may
be damaged and picture may be deteriorated.
Returning point for Playback, Repeat Play or Series Playback can be set
to tape end or recording end. (This VCR considers 1-second unrecorded
portion as the recording end.) When the returning point is reached,
playback stops and the cassette will be automatically rewound.
NOTE:
The setting you have made is kept in memory. Even if the VCR is unplugged or the
power failure occurs, it will resume every time you turn on the VCR. (
੬
pg. 9)
When this function is set to "ON", you can record Month/Day/Year and
clock time display (੬ pg. 61) with your picture.
NOTES:
●
To use this function, be sure to set "ON SCREEN (REC)" to "ON". (
੬
pg. 37, 38)
●
The superimposed operational indicators on the screen will also be recorded.
●
The setting you have made is kept in memory. Even if the VCR is unplugged or
the power failure occurs, it will resume every time you turn on the VCR.
(
੬
␣ pg.␣ 9)
●
This function is not available during Audio Dubbing or Insert Editing.
Usually, you can only record onto a cassette with its record safety tab
intact. When the this function is set to “OFF”, recording can be done
onto a cassette whose record safety tab is removed.
NOTES:
●
The setting you have made is kept in memory. Even if the VCR is unplugged or
the power failure occurs, it will resume every time you turn on the VCR.
(
੬
␣ pg.␣ 9)
●
When "REC SAFETY" is set to "OFF", playback does not start automatically when
you insert a cassette with its record safety tab removed. (
੬
pg. 15)
When you set daily timer recording, you can use one cassette repeatedly.
If you select "AUTO REW", the VCR rewinds tape each time after timer
recording and the timer mode is engaged.
If you select "NORM", the VCR turns off after timer recording. Rewinds
the tape or replace it, and engage timer recording standby mode
manually.
Ⅵ RETURN POINT
TAPE END: Playback stops at the
end of tape.
REC END: Playback stops at the
end of the recording.
Ⅵ DAY/TIME INSERT
ON
OFF
Ⅵ REC SAFETY
ON
OFF
Ⅵ DAILY T. RECORD
NORM
AUTO REW