Filter
Top Products
EN
21
D
CH 125 RECORD
FRI 12:00:00 AM PAUSE
11/30/01 ]SP
STEREO
SAP
INDEX 1
NORM REMAIN 10:00
HI–FI COUNT –1:23:45
BE
+++
C
Watching one program while
recording another
1 Engage TV mode
During recording...
● If you connect the TV and the VCR only using
the RF connection (੬ pg. 7) to view pictures
from the VCR
Press TV/VCR on the Remote so that VCR mode
indicator goes off from the front display panel.
(The TV broadcast being recorded disappears.)
● If you are using the AV connection (੬ pg. 7) to
view pictures from the VCR, change the TV’s
input mode from AV to TV.
2 Select channel for viewing
Select the channel, you want to watch, on the TV.
Showing on-screen display
When “ON SCREEN (REC)” is set to “ON” (੬ pg. 37,
38), you can see the current VCR status on the TV
screen.
● For more detailed information about the on-screen
display, see page 61.
1 Display VCR status on TV screen
During recording or
recording pause, press
OSD.
All indications
corresponding to the
current VCR status are
displayed for 5 seconds.
The time counter remains
on the screen indicating the elapsed time.
● The indications will be recorded. If you do not
want to record the superimposed operational
indications on the screen, set “ON SCREEN
(REC)” to “OFF”. (੬␣ pg.␣ 37, 38)
2 Exit on-screen display
Press OSD again.
NOTES:
●
If the VCR is in recording pause mode, “RECORD/PAUSE” is
always displayed (except when "DAY/TIME INSERT" is set to
"ON").
●
The VCR status can be also displayed during playback.
Other useful functions for recording
● Recording Resume Function
If there is a power outage during recording (or timer
recording or Series Recording), the recording will resume
automatically when the power is restored to the VCR. (No
setting is required for this function.)
● Video Calibration (੬ pg. 38)
When this function is set to “ON”, this VCR checks the
condition of the tape in use during playback and
recording, and compensates to provide the highest-
possible pictures.
● Second Audio Recording (੬ pg. 40)
This VCR’s built-in MTS decoder enables reception of
Multichannel TV Sound broadcast.
To record a SAP program received, set “2ND AUDIO
RECORD” to “ON” using the menu screen.
NOTES:
When the channel is changed on the VCR;
●
The “STEREO” indication appears on the screen for about
5 seconds if the program is a stereo broadcast.
●
The “SAP” indication appears on the screen for about
5␣ seconds if the program is a SAP broadcast.
●
Both indications appear when a stereo program is
accompanied by SAP sound.
● S-VHS Recording Mode (੬ pg. 40)
This VCR allows you to record on an S-VHS tape with VHS
picture quality.
● S-VHS ET (੬ pg. 41)
This function allows you to record on VHS tapes with S-
VHS picture quality. Tapes recorded using this function can
be played back on a VCR equipped with the S-VHS ET
function.
To prohibit operations during recording (Mode Lock)
Press and hold OK on the Remote for more than 5
seconds. " "
and " "
light up on the front display panel
(੬ pg. 60). No button will function and recording will
not be interrupted until it completes.
To resume the other operations, press and hold OK on
the Remote again for more than 5 seconds.
● When OK is pressed to set Mode Lock, the on-screen
display appears and the time counter will be recorded
with your picture. If the time counter is not necessary,
set "ON SCREEN (REC)" to "OFF" ( ੬ pg. 37, 39).