Filter
Top Products
EN
19
Basic
Recording
2
Select recording channel
On the front panel:
Push the JOG dial, then turn it to the left or right.
On the Remote:
a– Press CH + or –.
or
b– Press the Number keys.
● If you connect the TV and the VCR only using
the RF connection, press TV/VCR on the Remote
so that the VCR mode indicator lights on the front
display panel, to view the program to be recorded.
3
Set tape speed
Press SP/EP to set the recording speed.
4
Start recording
On the front panel:
Press REC ( ¶ ).
On the Remote:
While holding REC ( ¶ ), press PLAY ( 3 ).
● If “VIDEO CALIBRATION” is set to “ON”
(default setting: ੬ pg. 37, 38), this VCR checks
the tape condition for about seven seconds,
then starts recording. This means that the first
seven seconds of the program will not be
recorded. If this is inconvenient for you, follow
the steps below:
1 Press REC ( ¶ ) and PAUSE ( 8 ) to start
Video Calibration.
2 Then press PLAY ( 3 ) to start recording
after Video Calibration is complete.
To pause recording
Press PAUSE ( 8 ). To resume recording, press PLAY ( 3 ).
● Pressing REC ( ¶ ) on the front panel also resumes
recording.
To stop recording
Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 )
on the front panel.
To rewind the tape (when it is not running)
Press REW ( 1 ) (or turn the JOG dial on the front
panel to the left).
To fast-forward the tape (when it is not running)
Press FF ( ¡ ) (or turn the JOG dial on the front panel
to the right).
To eject the tape
Press STOP/EJECT ( 7 / 0 ) on the front panel when the
tape is not running.
● You can also eject the cassette with the VCR turned off.
To turn off the VCR
Press POWER.
It may be unlawful to record or play back
copyrighted material without the consent of the
copyright owner.
Turn on the VCR and the TV, and select the VCR
channel 3 or 4 (or AV mode) on the TV.
This VCR can check the tape condition during recording
(and playback), and realizes the best possible pictures.
1
Load a cassette
Make sure the record safety tab is intact. If not,
set "REC SAFETY" to "OFF" ( ੬ pg. 37, 41).
● You can also record onto a cassette without a
record safety tab by covering the hole with
adhesive tape before inserting the cassette.
123
456
7
89
0
2
4
1
3
STOP ( 7 )
FF ( ¡ )REW ( 1 )
3
2
–a
4
2 –b
POWER
PAUSE ( 8 )
TV/VCR
VIDEO (MONO)L—AUDIO—R
S VIDEO
A.DUB
DIGITAL TBC/NR
FF
REW
POWER
SPEP
VCR
REC PAUSE STOP/EJECT
PLAY
–
+
CH– /+
PUSH / TURN
INSERT
24HR QUICK
PROGRAM
REC LINK
STOP/EJECT
( 7 / 0 )
JOG dial
4
PAUSE ( 8 )
PLAY ( 3 )
POWER