Filter
Top Products
10
Getting started
Analogue connection for DVD MULTI playback (see page 34)
COAXIAL
AM LOOP
ANTENNA
DVD
IN
AUDIO
L
R
L
R
FM 75
AM EXT
CENTER
FRONT
AV IN / OUT
AV IN
SUBWOOFER
OUT
DIGITAL IN
DIGITAL 3
(DVD)
DIGITAL 2
(STB)
DIGITAL 1
(VR)
CENTER
SPEAKER
SURROUND
SPEAKERS
RIGHT LEFTRIGHT LEFT
FRONT
SPEAKERS
SUB
WOOFER
SURR
(REAR)
CAUTION:
SPEAKER
IMPEDANCE
8
~
16
DVD
IN
AUDIO
L
R
L
R
CENTER
FRONT
SUB
WOOFER
SURR
(REAR)
VR TV
DVD STB
Stereo audio cord
(not supplied)
Monaural
audio cord
(not supplied)
Monaural audio cord
(not supplied)
Stereo audio cord (not supplied)
To center channel audio output
To surround left channel audio
output
To surround right channel audio
output
To subwoofer output
To front right channel audio
output
To front left channel audio output
NOTE
When using the DVD MULTI playback, use the same DVD player
connected to this receiver by a SCART cable. If you connect a
different DVD player, the mixed sound from front left and right
channels are reproduced.
Connecting the power cord
Before plugging the power cord into an AC outlet, make sure that all connections have been made.
Plug the power cord into an AC outlet.
Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference.
We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.
NOTE
The preset settings such as preset channels and sound adjustment may be erased in a few days in the following cases:
– When you unplug the power cord.
– When a power failure occurs.
CAUTIONS:
• Do not touch the power cord with wet hands.
• Do not alter, twist or pull the power cord when disconnecting it, or put anything heavy on it, which may cause fire, electric shock, or other
accidents.
DVD player with 5.1 channel
analogue discrete jacks
01-10_RX-ES9SL[B]f 03.6.27, 16:4510