Filter
Top Products
25
Switching to a Broadcast Program of
Your Choice Temporarily
Another convenient RDS service is called “Enhanced Other
Network.”
This allows the receiver to switch temporarily to a broadcast
program of your choice (TA, NEWS, and/or INFO) from a different
source except in the following cases:
• When you are listening to non-RDS stations (all AM—MW/LW,
some FM stations and other sources).
• When the last received FM station is a non-RDS station.
• When the receiver is in standby mode.
Before you start, remember...
• The Enhanced Other Network function is only applicable to preset
stations.
1
Press TA/NEWS/INFO repeatedly until the
program type you want appears on the display.
• Each time you press the button, the display changes to show
the following:
TA: Traffic Announcement in your area.
NEWS: News.
INFO: Program the purpose of which is to impart advice in
the widest sense.
Note:
You can use TA/NEWS/INFO on the remote control after pressing
FM/AM.
‘
If the FM station you are listening to is
broadcasting the program you have selected
The receiver continues to receive the station, but the indicator
of received PTY code starts flashing.
When the program is over, the indicator of received PTY code
stops flashing and remains lit, but the receiver remains in
Enhanced Other Network standby mode.
To stop listening to the program selected by Enhanced Other
Network
Press TA/NEWS/INFO again so that the program type (TA/NEWS/
INFO) indicator goes off from the display. The receiver exits from
Enhanced Other Network and goes back to the previously selected
station.
Notes:
• Enhanced Other Network data sent from some stations may not be
compatible with this receiver.
• Enhanced Other Network does not function for some FM stations
with RDS service.
• In Enhanced Other Network standby mode, if you carry out
synchronized recording (see page 33), Enhanced Other Network
standby mode is canceled temporarily. The receiver goes back to
Enhanced Other Network standby mode again when you have
finished that operation.
• The Enhanced Other Network mode only works when receiving an
FM station with the Enhanced Other Network code. (The Enhanced
Other Network indicator lights up while receiving an AM (MW/LW)
station but the Enhanced Other Network function will not work.)
• While listening to a program tuned in by the Enhanced Other
Network function, you cannot use source selecting buttons and
PTY SEARCH button.
CAUTION:
When the source alternates intermittently between the station tuned in
by the Enhanced Other Network function and the currently selected
source, press TA/NEWS/INFO repeatedly to cancel the Enhanced
Other Network function. If you do not press the button, the currently
tuned station is received finally, and the indication of the Enhanced
Other Network program type flashing on the display disappears.
CASE 2
From the remote control
On the front panel
TA/NEWS/INFO
( PTY – PTY SEARCH – PTY 9
DISPLAY
MODE
/REW FF/
TA/NEWS/INFO
TA
NEWS/INFO
TA/INFO
NEWS
TA/NEWS/INFO
INFO
TA/NEWS
If there is no station broadcasting the program
you have selected
The receiver continues playing the current source (all sources
except AM—MW/LW).
When a station starts broadcasting the program you have
selected, the receiver automatically switches to the station.
The indicator of received PTY code starts flashing.
When the program is over, the receiver goes back to the
previously selected source, but still remains in Enhanced Other
Network standby mode. The indicator of received PTY code
stops flashing and remains lit.
CASE 1
‘
‘
Tuner Operations
EN10-25.RX-7022R[B] 02.1.22, 11:02 AM25