Filter
Top Products
Page 29
English
3. Press SURROUND ADJUST so that the Control
%%
%%
% /
fifi
fifi
fi /
@@
@@
@ /
##
##
# buttons work for surround
settings.
The lamp next to the button lights up.
4. Press Control
%%
%%
% /
fifi
fifi
fi until “– REAR +” appears on the display.
5. Press Control
@@
@@
@ /
##
##
# to adjust the rear speaker output level.
• Pressing Control @ decreases the output level up to –10 dB.
• Pressing Control # increases the output level up to +10 dB.
6. Press Control
%%
%%
% /
fifi
fifi
fi until “–DELAY +” appears on the display.
7. Press Control
@@
@@
@ /
##
##
# to adjust the delay time of the rear speaker output.
Each time you press the button, the delay time changes as follows:
DELAY 1: Select this when the distance from you to your rear speakers is greater than that to the front
speakers.
DELAY 2: Select this when the distance from you to your rear speakers is almost equal to that to the
front speakers.
DELAY 3: Select this when the distance from you to your rear speakers is a little less than that to the
front speakers.
DELAY 4: Select this when the distance from you to your rear speakers is much less than that to the
front speakers.
To cancel the Hall surround, press Control % / fi until “SURR OFF” appears in step 2.
The HALL and SURROUND indicators go off.
From the remote control:
1. Press ON/OFF so that the SURROUND indicator lights up on the display.
The previous surround mode is recalled (at its previous settings) and is shown on the display.
Each time you press the button, the surround mode turns on and off.
2. Press MODE repeatedly until “HALL” appears on the display.
Each time you press the button, the surround modes change as follows (the indicator of the selected
surround mode also lights up on the display):
3. Press REAR +/– to adjust the rear speaker output level.
• Pressing REAR – decreases the output level up to –10 dB.
• Pressing REAR + increases the output level up to +10 dB.
4. Press DELAY to adjust the delay time.
Each time you press the button, the delay time changes as follows:
To cancel the Hall Surround, press ON/OFF again so that the HALL and SURROUND indicators go
off.
Selecting “SURR OFF” in step 2 above also cancels the Dolby Surround.
Front panel
SURROUND
ADJUST
DELAY 1
DELAY 2
DELAY 4
DELAY 3
DELAY 1
DELAY 2
DELAY 4
DELAY 3
(Surround Off)
PROLOGIC 3CHLOGIC
SURR OFF
HALL
ON/OFF
MODE
REAR
DELAY
Remote Control
RX-630RBK[EF]0055-001A.En.28-34 97.7.25, 5:51 PM29