JVC RX-6030VBK Stereo Receiver User Manual


 
39
English
Specifications
Designs & specifications are subject to change without notice.
RX-6030VBK/RX-6032VSL
Amplifier
Output Power: At Stereo operation:
Front channels: 100 W per channel, min. RMS, driven into 8 , 40 Hz to
20 kHz with no more than 0.8% total harmonic
distortion.
At Surround operation:
Front channels: 100 W per channel, min. RMS, driven into 8 at 1 kHz with no
more than 0.8% total harmonic distortion.
Center channel: 100 W, min. RMS, driven into 8 at 1 kHz, with no more than
0.8% total harmonic distortion.
Surround channels: 100 W per channel, min. RMS, driven into 8 at 1 kHz, with no
more than 0.8% total harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz): CD, TAPE/CDR, VCR, TV SOUND, DVD: 220 mV/47 k
Audio Input (DIGITAL IN)*: Coaxial: DIGITAL 1 (DVD): 0.5 V (p-p)/75
Optical: DIGITAL 2 (CD): –21 dBm to –15 dBm (660 nm ±30 nm)
* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround
(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).
Audio Output Level: TAPE/CDR, VCR: 220 mV
Signal-to-Noise Ratio (’66 IHF/’78 IHF): CD, TAPE/CDR, VCR, TV SOUND, DVD: 87 dB/78 dB
Frequency Response (8 ): CD, TAPE/CDR, VCR, TV SOUND, DVD: 20 Hz to 20 kHz (±1 dB)
Bass boost: +3 dB ±1 dB at 100 Hz
Tone Control: Bass (100 Hz): ±10 dB
Treble (10 kHz): ±10 dB
Video
Video Input Sensitivity/Impedance:
Composite video: DVD, VCR: 1 V(p-p)/75
S-video: DVD, VCR: (Y: luminance): 1 V(p-p)/75
(C: chrominance, burst): 0.286 V(p-p)/75
Component video: DVD, VCR: (Y: luminance): 1 V(p-p)/75
(PB, PR): 0.7 V(p-p)/75
Video Output Level/Impedance:
Composite video: VCR, MONITOR OUT: 1 V(p-p)/75
S-video: VCR, MONITOR OUT: (Y: luminance): 1 V(p-p)/75
(C: chrominance, burst): 0.286 V(p-p)/75
Component video: MONITOR OUT: (Y: luminance): 1 V(p-p)/75
(PB, PR): 1 V(p-p)/75
Synchronization: Negative
Signal-to-Noise Ratio: 45 dB
FM tuner (IHF)
Tuning Range: 87.5 MHz to 108.0 MHz
Usable Sensitivity: Monaural: 12.8 dBf (1.2 µV/75 )
50 dB Quieting Sensitivity: Monaural: 21.3 dBf (3.2 µV/75 )
Stereo: 41.3 dBf (31.5 µV/75 )
Signal-to-Noise Ratio (IHF-A weighted): Monaural: 78 dB at 85 dBf
Stereo: 73 dB at 85 dBf
Total Harmonic Distortion: Monaural: 0.4% at 1 kHz
Stereo: 0.6% at 1 kHz
Stereo Separation at REC OUT: 35 dB at 1 kHz
Alternate Channel Selectivity: 45 dB: (±400 kHz)
Frequency Response: 30 Hz to 15 kHz: (+0.5 dB, –3 dB)
AM tuner
Tuning Range: 530 kHz to 1 710 kHz
Usable Sensitivity: Loop antenna: 400 µV/m
Signal-to-Noise Ratio: 50 dB (100 mV/m)
General
Power Requirements: AC 120 V , 60 Hz
Power Consumption: 180 W/230 VA (at operation)
2 W (in standby mode)
Dimensions (W x H x D): 435 mm x 146.5 mm x 409.5 mm
(17
3
/16 in. x 5
13
/16 in. x 16
1
/8 in.)
Mass: 8.8 kg (19.5 lbs)
EN28-40_RX-60_5030[C]f 02.12.24, 18:4139