Filter
Top Products
33
CD changer
After pressing CD-DISC, you can use the following buttons for
the CD changer operations:
3 Start playback.
4 Return to the beginning of the current
(or previous) tracks.
¢ Skip to the beginning of the next tracks.
7 Stop playback.
8 Pause playback. To release, press 3.
1 – 6, 7/P Select the number of a disc installed in a CD
changer.
After pressing CD, you can use the following buttons for the
CD changer operations:
1 – 10, +10 Select a track number directly.
• For track number 5, press 5.
• For track number 15, press +10, then 5.
• For track number 20, press +10, then 10.
• For track number 30, press +10, +10, then 10.
Example:
Selecting disc number 4, track number 12, and starting
playback.
1
Press CD-DISC, then press 4.
2
Press CD, then press +10, 2.
If your CD changer is of 200-disc loading capability
(except for XL-MC100 and XL-MC301),
you can do the following operations using the number buttons
after pressing CD:
1
Select a disc number.
2
Select a track number (always enter two digits).
3
Start playback.
Examples:
• Selecting disc number 3, track number 2, and starting
playback.
Press 3, then, 0, 2, then 3.
• Selecting disc number 10, track number 5, and starting
playback.
Press 1, 0, then, 0, 5, then 3.
• Selecting disc number 105, track number 12, and starting
playback.
Press 1, 0, 5, then 1, 2, then 3.
Cassette deck
After pressing TAPE/CDR, you can use the following buttons
for the cassette deck operations:
3 Start playback.
FF Fast wind a tape from left to right.
REW Fast wind a tape from right to left.
7 Stop playback or recording.
8 Pause playback. To release, press 3.
REC PAUSE Press this button to enter recording pause.
Press this button then 3 to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 12.
CD player
After pressing CD, you can use the following buttons for the
CD operations:
3 Start playback.
4 Return to the beginning of the current
(or previous) tracks.
¢ Skip to the beginning of the next tracks.
7 Stop playback.
8 Pause playback. To release, press 3.
1 – 10, +10 Select a track number directly.
• For track number 5, press 5.
• For track number 15, press +10, then 5.
• For track number 20, press +10, then 10.
Operating JVC’s Audio/Video Components
CD recorder
After pressing TAPE/CDR, you can use the following buttons
for the CD recorder operations:
3 Start playback.
4 Return to the beginning of the current
(or previous) tracks.
¢ Skip to the beginning of the next tracks.
7 Stop playback.
8 Pause playback. To release, press 3.
REC PAUSE Press this button to enter recording pause.
Press this button then 3 to start recording.
Note:
Before starting the above operations, make sure that you have
changed the source name correctly. See page 12.
28-39_RX-60_5030[J]f 02.11.28, 13:4833