Filter
Top Products
16
The following tuner operations are possible only using the
remote control.
IMPORTANT:
Before using operating buttons for Radio Data System, press FM/
AM on the remote control so that those buttons work for tuner
operation.
Receiving FM Stations with Radio
Data System
Radio Data System allows FM stations to send an additional signal
along with their regular program signals. For example, the stations
send their station names, as well as information about what type of
program they broadcast, such as sports or music, etc.
With the receiver, you can receive the following types of Radio Data
System signals.
PS (Program Service): Shows commonly known station names
PTY (Program Type): Shows types of broadcast programs
RT (Radio Text): Shows text messages the station sends
Enhanced Other Networks:
Provides the information about the
types of the programs sent by other
Radio Data System stations of the
different Networks than the one being
received.
Notes:
• Radio Data System is not available for AM (MW) broadcasts.
• Not all FM stations provide Radio Data System signals, nor do all
Radio Data System stations provide the same services. If in doubt,
check with local radio stations for details on Radio Data System in
your area.
• Radio Data System may not operate correctly if the station tuned is
not transmitting Radio Data System signal properly or if the signal
strength is weak.
Receiving Radio Broadcasts
CD
-
DISC
REC PAUSE
REW
FF
TA/NEWS/INFO
DISPLAY MODE
PTY-PTY SEARCH-PTY
Receiving FM Stations with Radio
Data System
(To show the Radio Data System
information)
Searching for a Program by PTY
Codes
Switching to a Program of Your
Choice Automatically
To show the Radio Data System information
You can see the Radio Data System information the station sends on
the display.
Press DISPLAY MODE on the remote control while listening to
an FM station.
• Each time you press the button, the display changes to show you
the following information:
PS (Program Service): While searching, “PS” appears and
then the station names will be
displayed. “NO PS” appears if no
signal is sent.
PTY (Program Type): While searching, “PTY” appears and
then the type of the broadcast program
will be displayed. “NO PTY” appears
if no signal is sent.
RT (Radio Text): While searching, “RT” appears and
then text messages the station sends
will be displayed. “NO RT” appears if
no signal is sent.
Notes:
• If searching finishes at once, “PS,” “PTY,” and “RT” will not appear
on the display.
• Some special characters and marks may not be displayed correctly.
(The display cannot show accented letters, “A,” for instance, may
stand for accented “A’s” like “Å, Ä, Ã, Á, À, and Â.”)
PS
Canceled
PTY
RT
14-18_RX-5062S[B].p65 05.12.16, 19:0616