JVC RX-5060B Stereo Receiver User Manual


 
34
Specifications
Designs and specifications are subject to change without notice.
Amplifier
Output Power
Front channels: 100 W per channel, min. RMS, driven into
8 , at 1 kHz with no more than 10% total
harmonic distortion.
Center channel: 100 W, min. RMS, driven into 8 , at 1 kHz
with no more than 10% total harmonic
distortion.
Surround channels:100 W per channel, min. RMS, driven into
8 , at 1 kHz with no more than 10% total
harmonic distortion.
Audio
Audio Input Sensitivity/Impedance (1 kHz)
CD, TAPE/CDR, VCR, TV SOUND, DVD, AUX:
220 mV/47 k
Audio Input (DIGITAL IN)*
Coaxial DIGITAL 1 (DVD): 0.5 V(p-p)/75
Optical DIGITAL 2 (CD):
–21 dBm to –15 dBm (660 nm ±30 nm)
*Corresponding to Linear PCM, Dolby Digital, and DTS
Digital Surround (with sampling frequency—32 kHz,
44.1 kHz, 48 kHz)
Recording Output Level
TAPE/CDR, VCR: 220 mV
Signal-to-Noise Ratio (’66 IHF/DIN)
CD, TAPE/CDR, VCR, TV SOUND, DVD: 66 dB/62 dB
Frequency Response (8 )
CD, TAPE/CDR, VCR, TV SOUND, DVD, AUX:
20 Hz to 20 kHz (±1 dB)
Equalization (5 bands)
63 Hz, 250 Hz, 1 kHz, 4 kHz, 16 kHz: ±8 dB (in 2 dB steps)
Video
Video Input Sensitivity/Impedance
Composite video
DVD, VCR, AUX: 1 V(p-p)/75
Video Output Level
Composite video
VCR, MONITOR OUT: 1 V(p-p)/75
Synchronization: Negative
Signal-to-Noise Ratio: 45 dB
FM tuner (IHF)
Tuning Range: 87.50 MHz to 108.00 MHz
Usable Sensitivity
Monaural: 17.0 dBf (1.9 µV/75 )
50 dB Quieting Sensitivity
Monaural: 21.3 dBf (3.2 µV/75 )
Stereo: 41.3 dBf (31.8 µV/75 )
Stereo Separation at OUT (REC): 35 dB at 1 kHz
AM (MW) tuner
Tuning Range: 522 kHz to 1 629 kHz
General
Power Requirements: AC 230 V , 50 Hz
Power Consumption: 140 W (at operation)
0.8 W (in standby mode)
Dimensions (W x H x D): 435 mm x 146.5 mm x 369.5 mm
Mass: 7.0 kg
31-34_RX-5062S[B].p65 06.1.17, 22:1634