Filter
Top Products
8
Erasing tracks (ERASE function)
This enables unnecessary tracks. Narration, etc. to be
erased speedily. The erased parts do not remain as si-
lences but are closed up by the subsequent tracks.
Erasing all the tracks (ALL ERASE
function)
All the tracks can be erased at once without recording
fresh material over them.
Giving titles to discs and tracks
(TITLE function)
A title consisting of up to 64 characters can be given to
a disc and a track. The title given appears in the display
window.
Dividing tracks (DIVIDE function)
This involves adding a track mark (see Note) at some
point during the track which is to be made into the start
of an additional track so that the original track is di-
vided into two tracks.
Joining tracks (JOIN function)
This involves erasing a track mark and turning two ad-
joining tracks into one track.
Moving tracks (MOVE function)
Tracks can be moved around so that they are in the de-
sired sequence.
SYNCHRO Recording (SYNCHRO)
The synchro recording automatically starts when an input signal is given and ends if no signal condition continues for 30 seconds.
1 Insert an MD with its label side facing up.
2 Set the REC MODE switch to SYNCHRO.
3 Slide the REC button.
“SYNCHRO REC ON” appears and the “SYNC” indicator lights up on the display. Then, the disc mark blinks.
4 Press the 6 button.
The “SYNC” indicator blinks, indicating that the unit enters Rec/Standby mode.
5 Play the recording source.
When an input signal is detected by the unit, recording automatically starts.
The recording will automatically end if no signal condition continues for 30 seconds.
Note
Once the 6 button is pressed during the SYNCHRO recording, the unit enters Rec/Pause mode and the SYN-
CHRO recording is disabled. To restart the SYNCHRO recording, repeat the above steps.
Editing the MD (Using the unit)
In addition to its recording and play functions, the unit comes with editing functions. You can divide, join, move, or
erase the recorded tracks in the MD as required. Also, you can give a disc title to the MD and track titles to the
tracks in the MD.
Note that you cannot edit the MD in Random Play mode.
MOVE
JOIN
DIVIDE
Track No.
Track A Track B Track C Track D
Track A
Track B Track C Track D
Track No.
New tracks can be recorded.
ALL
ERASE
Erasing
Track B
Track A
Track B Track C Track D
Track A
Track C Track D
New tracks can
be recorded.
Track No.
Track A Track B Track C Track D
Track No.
Track A Track B Track C Track D
Track A + Track B Track C Track D
Track No.
Track A Track B Track C Track D
Track A Track C Track D Track B
Note
Track marks: These marks are provided to locate the start of each track. Whatever lies between one track mark and
the next is considered to a track and the numbers of the tracks (called “track numbers”) are displayed in the sequence
in which they are to be played.
XM-R70(B)_P1-8.p65 6/23/99, 3:09 PM8