Filter
Top Products
12
Specifications
Amplifier
Output Power
Main Speaker 10 W per channel, min. RMS, driven
into 6Ω at 1kHz, with no more than
10% total harmonic distortion
Subwoofer 30W, min. RMS, driven into 8Ω at
100Hz, with no more than 10% total
harmonic distortion
Terminals
Input Sensitivity/Impedance (1 kHz)
AUX IN LEVEL1 500 mV/47 kΩ
LEVEL2 125 mV/47 kΩ
USB AUDIO Ver. 1.1
USB MEMORY Ver. 1.1
Compatible device Mass Storage Class
Compatible file system FAT16, FAT32
Bus power supply Max. 5V/500 mA
iPod
Compatible iPod types See Page 8
Bus power supply Max. 5V/500 mA
Speaker terminals Main speaker 6Ω-16Ω
Subwoofer 8Ω-16Ω
PHONES 32Ω - 1 kΩ
15 mW/ch output into 32Ω
Unit
Dimensions 90mm × 96mm × 137mm
(3-
9
/
16
" × 3-
13
/
16
" × 5-
7
/
16
")
(W/H/D)
Mass Approx. 0.5kg (1.1lbs)
Speaker Specifications
Main speaker SP-NXPS1F (each unit)
Type Full range bass-reflex type
Speaker Unit 7.5 cm (3") cone × 1
Power handling Capacity
10 W
Impedance 6Ω
Frequency Range 150 Hz - 20 kHz
Sound pressure level 83 dB/W • m
Dimensions 90mm × 96mm × ×90mm
(3-
9
/
16
" × 3-
13
/
16
" × 3-
9
/
16
")
(W/H/D)
Mass Approx. 0.63kg (1.4lbs)
Subwoofer SP-NXPS1W
Type Bass Reflex Type
Speaker Unit 16 cm (6-
5
/
16
") cone × 1
Power handling Capacity
30 W
Impedance 8Ω
Frequency Range 35 Hz - 150Hz
Sound pressure level 80 dB/W • m
Dimensions 221mm × 221mm × 222mm
(8-3/4" × 8-3/4" × 8-3/4")
(W/H/D)
Mass Approx. 3.5kg (7.8lbs)
Accessories
See Page 3
Power Specifications
NX-PS1 (System)
Power Requirements AC 110V-240V 50Hz/60Hz
Power Consumption 19 W (power on mode)
12 W (in Standby mode)
1 W (in ECO mode)
AC Adaptor (AA-R2401)
INPUT
AC 110V-240V 50Hz/60Hz 1.5A
OUTPUT DC 23V 2.5A, 57.5VA
CA-NXPS1 (Main Unit)
Power Requirements DC IN 23V 2.5A
Design and specifications are subject to change without notice.
NX-PS1[J].BOOK Page 12 Friday, October 27, 2006 5:02 PM