JVC MX-JE31 Stereo System User Manual


 
40
Unique DVD/VCD Operations
(see pages 17 to 19)
Selecting the Sound Track:
On some DVD Videos, you cannot change audio languages
while playing back.
Playing Back a Bonus Group (MX-JE5 only):
You cannot select a track in the bonus group for Program
Play.
Special Picture Playback:
During slow-motion playback, no sound will be
reproduced.
While zoomed in, the picture may look coarse.
Advanced Disc Operations
(see pages 20 to 22)
Programming
the Playing
Order—Program Play:
While programming steps...
Your entry will be ignored if you have tried to program an
item number that does not exist on the disc (for example,
selecting track 14 on a disc that only has 12 tracks).
You cannot use Program Play and Random Play for JPEG
discs.
On-Screen Disc Operations
(see pages 23 to 27)
Operations Using the On-screen Bar:
A-B Repeat:
A-B Repeat cannot be used on some DVDs.
A-B Repeat is possible only within the same title or
within the same track.
Operations on the CONTROL Screen:
For JPEG files playback...
It is recommended that you record a file at 640 x 480
resolution. (If a file has been recorded at a resolution of
more than 640 x 480, it will take a long time to be
shown.)
This System can play only baseline JPEG files*.
Progressive JPEG files* or lossless JPEG files* cannot
be played.
* Baseline JPEG format: Used for digital cameras,
web, etc.
Progressive JPEG format:Used for web.
Lossless JPEG format: An old type and rarely used
now.
This system can play back JPEG files with the extension
code <.jpg> or <.jpeg> (regardless of the letter case-upper/
lower).
This system may not play back JPEG files properly if they
are recorded on the devices other than digital still camera.
During slide-show playback, zoom cannot be operated.
Recording Operations
(see pages 28 to 29)
Recording on a Tape:
The recording level is automatically set correctly. Thus,
you can adjust the sound you are actually listening to
without affecting the recording level.
There is leader tape which cannot be recorded onto at the
start and the end of cassette tapes. Thus, when recording
discs or radio broadcasts, wind the leader tape first to
ensure that the recording will be made without any music
part lost.
If no cassette is inserted, “NO TAPE” appears on the
display. If a protected tape has been inserted, “NO REC”
appears on the display.
When using Reverse Mode for recording, start recording in
the forward (3
) direction first; otherwise, recording will
stop when only one side (reverse) of the tape is recorded.
You cannot change the source during recording.
Synchronized Disc Recording:
While recording, you cannot use ¢
/4
, ¡
/1
, DVD
LEVEL, 3D PHONIC and source buttons.
You can adjust volume control and sound setting (Active
Bass Extension, Rhythm AX – for MX-JE5, Sound Turbo
–for MX-JE3/JE31), sound mode but the settings do not
affect the recording sound.
Everything on the disc goes onto the tape in the order on
the disc, or according to the order you have made for
Program Play.
You cannot use Repeat Play while synchronized recording
(Repeat Play will be canceled).
When recording starts, “DISC REC” appears on the
display and the REC (recording) lamp flashes.
When the tape reaches its end in the forward direction (3
)
during recording, the last song will be re-recorded at the
beginning of the reverse side (2
).
When the tape reaches its end in the reverse side (2
)
during recording, recording stops even though the disc is
not entirely recorded.
Enjoying Karaoke
(see pages 30 to 33)
Singing along (Karaoke):
By pressing REC START/STOP, you can record your
singing along if you want.
MX-JE5 only: Key control cannot be activated while DVD
Audio is played.
Singing Along Using the Stereo Discs—Vocal Masking:
Vocal Masking Mode setting is also applied to the optical
digital output signals through the OPTICAL DIGITAL
OUTPUT terminal.
On some music, Vocal Masking does not provide the
correct effect.