JVC KD-MX2900R CD Player User Manual


 
24
ENGLISH
Playing an MD
1
2
1.Insert an MD into the loading
slot.
The unit turns on, draws the MD and starts
playback automatically.
2.Close the control panel by hand.
Open the control panel.
If there is already a CD or an MD inside the unit,
it ejects automatically.
Label side
To stop play and eject the MD
Press 0.
MD play stops, the control panel opens, then the MD automatically ejects from the loading slot.
If you change the source to FM, AM, CD changer or external component, the MD play also
stops (without ejecting the MD this time).
Notes:
If the ejected disc is not removed for about 15 seconds , the disc is automatically inserted again into
the loading slot to protect it from dust. (MD play will not start this time.)
You can eject the MD even when the unit is turned off.
You cannot insert a CD and an MD inside the unit at the same time.
When you insert an MD recorded in monaural, it will be played in monaural. While playing such a
monaural MD, the elapsed playing time may not be displayed correctly.
To change the display while playing an MD
Press DISP. Each time you press the button, the display changes to show the following:
Note:
If “SCROLL MODE” is set to either “SCROLL AUTO” or “SCROLL ONCE,” names including more
than 12 characters will be scrolled. (See page 38.)
Track number and Elapsed playing time
Disc title
Track title
1
Current track
Elapsed
playing time
Disc Title
Track Title
Insert an MD in the same way as
indicated on the MD
MD OPERATIONS
Note on One-Touch Operation:
When an MD is already in the loading slot, pressing MD/CD turns on the unit and starts
playback automatically.
Lights up
Shown if a title is recorded
EN24-27.KD-MX2900R[E]/F 00.1.26, 8:46 PM24