JVC LVT1266-001A Stereo System User Manual


 
29
Using Sleep Timer
With Sleep Timer, you can fall asleep to your favorite music
or radio program.
You can set Sleep Timer only when the unit is turned on.
You can also turn off the unit automatically by using Auto
Standby. (See page 10.)
How the Sleep Timer actually works
The unit automatically turns off after the specified length of
time passes.
On the remote control ONLY:
1
Press SLEEP.
The indicator starts flashing on the display.
Each time you press the button, the length of time
changes as follows:
2
Wait for about 5 seconds after specifying the
length of time.
The indicator flashes slowly on the display.
To check the remaining time until shut-off time, press
SLEEP once. The remaining time until shut-off time appears
for about 3 seconds.
To change the shut-off time, press SLEEP repeatedly until
the length of time you want appears.
To cancel the setting, press SLEEP repeatedly until the
SLEEP indicator goes off and display returns to the normal
indication.
Turning off the unit also cancels the Sleep Timer.
(canceled)
10 20
120
30 60
90
Off
SLEEP
When you set the Sleep Timer after the Daily Timer
starts playing the selected source
The unit turns off with either timer having an earlier shut-off time.
If you set the Sleep Timer while playing back or
recording a tape
Set the Sleep Timer not to shut the unit off while a tape is running.
If the unit turns off while playing back or recording a tape, the
cassette deck or tapes may be damaged.
27-29_UX-HB4[B]6.p65 04.8.5, 6:17 PM29