Filter
Top Products
14
To go to another track directly using the number
buttons
You can select a track only within a same group.
On the remote control ONLY:
Pressing the number button(s) before or
during play allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10, then
press 5.
For track number 20, press +10 twice, then
press 0.
If you select a track number does not exist in a group
The display for selecting a group number appears. In this case,
perform the same procedure to select a track as it is described on
page 13.
123
456
78
0
9
+10
Programming the Track Playing Order
—Program Play
You can arrange the order in which tracks to play before you
start playing. You can program up to 99 tracks.
On the remote control ONLY:
1
Place a disc.
• If the current source is not the CD player, press
CD 6, then 7 before going to the next step.
2
Press PROGRAM.
The PRGM (program) indicator and the program
step number appear and flash on the display.
3
Press ¢ or 4 to select the
track number, then press
PROGRAM.
You can also use the number button(s)
to select a track number.
• For the operation of the number
buttons, see “To go to another track
directly using the number buttons”
on page 13.
PROGRAM
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PROGRAM
123
456
78
0
9
+10
CD
3/8
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
When you are programming from MP3
disc
Pressing PRESET GROUP
or PRESET
GROUP
selects the first track of each
group.
4
Repeat step
3
to program other tracks you
want.
5
Press 7.
“Program Finish” appears and the PRGM
indicator remains lit on the display. The
program is stored in the memory.
6
Press CD 3/8.
The tracks are played in the order you have
programed.
If you try to program a 100th track
“Program Full” will appear on the display.
To stop playing, press 7.
To check the program contents
While the PRGM indicator is lit on the
display, you can check the program contents
by pressing ¢ or 4 repeatedly before or
after playback.
To add tracks in the program, repeat steps
2
and
3
of the programming procedure. The track will be
added on the last step.
To clear the program
Press 7 before or after playback when the
PRGM indicator is lit on the display.
“Clear Program” appears and the PRGM
indicator disappears from the display. All the
memory contents will be erased (resumes to
Normal Play).
• The programmed tracks are also erased in the following
cases:
– Pressing ) OPEN to open the disc cover
– Turning off the unit
– Changing the source
During Program Play
Auto Standby function does not take effect.
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
PRESET
GROUP
PRESET
GROUP
UP
DOWN
SEARCH/
SCROLL
DOWN
SEARCH/
SCROLL
UP
/
SELECT
Continued
12-16_UX-HB4[B]6.p65 04.8.5, 6:16 PM14