Filter
Top Products
9
ENGLISH
Tuning into a preset station
You can easily tune into a preset station.
Remember that you must store stations first. If you have not stored them yet, see pages 7
and 8.
When an FM stereo broadcast is hard to receive:
Press MO/RND (Mono/Random) while listening to an FM stereo
broadcast. The MO indicator lights up on the display, and the sound you
hear becomes monaural but reception will be improved.
To restore the stereo effect, press the same button again.
MO
RND
12
DISP
MO/RND
1
Select the band (FM1, FM2, FM3 or AM) you want.
2
Select the number (1 – 6) for the preset station
you want.
To change the display information while receiving a station
Press DISP. Each time you press the button, the following information is shown on the lower
part of the display.
When receiving an FM RDS station: Its PS (station name), band, and preset channel number
(if any) are always shown in the main display.
When receiving an AM station: Its station frequency, band, and preset channel number (if
any) are always shown in the main display.
* Level meter will not appear when “Level Meter” is deactivated (see page 28).
FM/AM
FM1 FM2 FM3
AM
PTY (program type)
Station frequency
Level mater Clock time
*
Level mater Clock time
*
EN06-09 KD-SX1500/f 99.4.26, 10:27 AM9