Filter
Top Products
6
ENGLISH
1
Select the band (FM1, FM2, FM3 or AM).
You can select any one of FM1, FM2, and FM3 to listen to an
FM station.
2
Start searching a station.
When a station is received, searching stops.
• If the program received is broadcast in
stereo, the ST indicator lights up on the
display.
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency without searching
1 Press FM/AM repeatedly to select the band (FM or AM).
2 Press and hold
¢ or 4
until “Manual” starts flashing on the display.
Now you can manually change the frequency while “Manual” is flashing.
3 Press
¢ or 4
repeatedly until the frequency you want is reached.
• If you hold down the button, the frequency keeps changing (in 50 kHz intervals for FM and
9 kHz intervals for AM–MW/LW) until you release the button.
To tune in FM stations only with strong signals
Press LO/RPT (Local/Repeat) so that “Local On” appears on the display.
Each time you press the button, “Local On” and “Local Off” alternates.
To tune in all receivable FM stations, press LO/RPT (Local/Repeat) again so that “Local
Off” appears.
Note:
This function only works while searching FM stations including SSM preset (see page 7).
RADIO OPERATIONS
Listening to the radio
LO/RPT
Clock time (or other indications: see also page
28) appears.
12
FM/AM
To search stations
of higher
frequencies
To search stations
of lower frequencies
FM1 FM2 FM3
AM
EN06-09 KD-SX1500/f 99.4.26, 10:27 AM6