Filter
Top Products
43
ENGLISH
Announcement Standby Reception
Press and hold TP/ANNOUNCE for more than 1 second to activate
Announcement Standby Reception.
The ANNOUNCE indicator lights up (as follows).
• While listening to a service supporting Announcement signals, the
ANNOUNCE indicator lights up
with its frame
. This receiver now stands by
for Announcement signal reception.
• While listening to a service NOT supporting Announcement signals,
the ANNOUNCE indicator
lights up
without its frame
.
In this case, Announcement Standby Reception does not work.
• If you press the button while listening to any other source
– The ANNOUNCE indicator comes to light up
with its frame
when a service
supporting Announcement signal is tuned in the background. This receiver
now stands by for the Announcement signal reception.
– The ANNOUNCE indicator keeps lit
without its frame
when a service
supporting Announcement signal is NOT tuned in the background. In
this case, this receiver cannot stand by for Announcement signal
reception.
How Announcement Standby Reception works:
If a service of the selected Announcement type starts broadcasting while the Announcement
Standby Reception is activated, the selected Announcement type name appears and the unit
tunes into the service. The service of the selected Announcement type can be heard.
To deactivate Announcement Standby Reception, press and hold TP/ANNOUNCE again.
Each time you press and hold the button for more than 1 second, Announcement Standby
Reception turns on and off.
TP
ANNOUNCE
EN37-46.KD-SX1500/f 99.4.26, 10:33 AM43