Filter
Top Products
46
ENGLISH
Adjusting Dynamic Range Control (DRC) effect
In a noisy environment such as in a car, listening condition and sound quality can be improved
by reducing the dynamic range of the DAB audio signal. For this purpose, some service
provides Dynamic Range Control signals together with their regular program signals.
This unit can use this Dynamic Range Control signals to reduce the dynamic range and
obtain the best possible listening condition and sound quality. When shipped from the factory,
“DRC Off” is selected.
• See also “Changing the general settings (PSM)” on page 26.
1 Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the display.
2 Press
¢ or 4 to select “DRC Effect,” if not shown on the display.
The current setting for this function also appears.
3 Rotate the control dial until the setting you want appears on the display.
As you rotate the dial, the setting turns on and off alternately.
Select one of following according to your preference.
As the number increases, the DRC effect level also increases.
DRC 1 < DRC 2 < DRC 3
To cancel the DRC effect, select “DRC Off.”
4 Press SEL again to finish the setting.
• When the settings other than “DRC Off” is selected, the DRC indicator lights up on the
display. (The DRC indicator lights up
with its frame
only when the unit received DRC
signal from the tuned service.)
Selecting DAB radio text display mode
You can select the DAB radio text (DLS: Dynamic Label Segment) display mode. When shipped
from the factory, “On” is selected.
• On: Text segments are sequentially scrolled if it consists of more than 32
characters.
• Headline Only: Shows the Headline Only and any remainder which is sent from a
service is refused.
• Off: Cancels DLS display.
1 Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the display.
2 Press
¢ or 4 to select “DAB Text,” if not shown on the display.
The current setting for this function also appears.
3 Rotate the control dial until the setting you want appears on the display.
As you rotate the dial, the indication changes as follows:
4 Press SEL to finish the setting.
DRC 1 DRC Off
DRC 3 DRC 2
CAUTION
We highly recommend you to avoid any text reading while driving because of safety reasons! Do not
risk your or other people’s life and get involved in an accident in whatever form.
Note:
“Headline Only” allows a service provider to show the significant content of a message which is
supposed to alter in a very low frequency.
If the service provider does not implement the corresponding command to determine the headline, the
entire text presentation is discarded and this unit performs as if “Off” is selected.
On
Headline Only
Off
EN37-46.KD-SX1500/f 99.4.26, 10:33 AM46