Filter
Top Products
10
ENGLISH
RADIO OPERATIONS
Listening to the radio
You can use either automatic searching or manual
searching to tune in to a particular station.
Searching a station automatically:
Auto search
1
Select the band (FM1 – 3, AM).
1 Press SRC (source)
repeatedly to select the tuner.
2 Press and hold SRC for more
than 1 second.
The band indication on the
display starts flashing.
3 Within about 5 seconds (while
the band indication is
flashing), press SRC again.
Each time you press the
button, the band changes.
Last received station of the selected band is
tuned in.
3456M21
D
SRC
DISP
ATT
SEL
BBE
MODE
SRC
Lights up when receiving an FM stereo broadcast
with sufficient signal strength.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to an
FM broadcast.
2
Start searching a station.
When a station is received, searching stops.
To stop searching before a station is received,
press the same button you have pressed for
searching.
Press ¢ to search
stations of higher
frequencies.
Press 4 to search
stations of lower
frequencies.
FM1
FM2FM3
AM
Ex. When the band is FM
If a name has been assigned to the station (see
page 44), the assigned name appears.
EN10-14SH9105[U]f.p65 03.3.6, 16:2110