Filter
Top Products
24
AUTO ON
OFF
ON
OFF
NORMAL PEAK
OFF
Selecting the level display
You can select the level display according to your preference. When shipped from the factory,
the level indicator on the display shows the audio level setting.
• NORMAL: Audio level indicator
• PEAK: Peak level indicator
• OFF: Volume level indicator
1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “LEVEL (with its current setting)” with ¢
or 4 .
3. Select the desired mode with the control dial.
The level display setting changes as follows:
Turning on or off the key-touch tone
You can deactivate the key-touch tone if you do not want to make it beep when you press a
button. When shipped from the factory, the key-touch tone is activated.
• ON: Activates the key-touch tone
• OFF: Deactivates the key-touch tone
1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “BEEP (with its current setting)” with ¢
or 4 .
3. Select the desired mode with the control dial.
The key-touch tone alternates between on and off.
Selecting the dimmer mode
When you turn on the car head lights, the display automatically dims (Auto Dimmer).
When shipped from the factory, Auto Dimmer mode is activated.
• AUTO: Activates Auto Dimmer
• ON: Always dims the display
• OFF: Cancels Auto Dimmer
1. Press and hold SEL (Select) for more than 2 seconds so that “PSM” appears on the lower
part of the display.
2. Select “DIMMER (with its current setting)” with ¢
or 4 .
3. Select the desired mode with the control dial.
The dimmer mode changes as follows:
Note on Auto Dimmer:
Auto dimmer of this unit may not work correctly on some vehicles, particularly on those having a
control dial for dimming.
In this case, set the dimmer mode to “ON” or “OFF.”
EN 21-32 KD-MX3000 [J]/F 98.10.19, 6:51 PM24