Filter
Top Products
10
1
Open the control panel.
If there is already a CD or an MD inside the unit,
it ejects automatically.
Playing a CD
1
Note on One-Touch Operation:
When a CD is already in the loading slot, pressing MD/CD turns on the unit and starts playback
automatically.
2
1. Insert a CD into the loading slot.
The unit turns on, draws the CD and starts playback
automatically.
2. Close the control panel by hand.
Note:
When a CD is inserted up side down, “PLEASE EJECT” appears on the display.
When you open the control panel by pressing 0, the CD automatically ejects.
Total track number
of the inserted disc
Total playing time of
the inserted disc
Current track
Elapsed
playing time
To stop play and eject the CD
Press 0.
CD play stops, the control panel opens, then the CD automatically ejects from the loading slot.
If you change the source to FM/AM, CD changer or external component, the CD play also
stops (without ejecting the CD this time).
Notes:
• If the ejected disc is not removed for about 15 seconds, the disc is automatically inserted again into
the loading slot to protect it from dust. (CD play will not start this time.)
• You can eject the CD even when the unit is turned off.
• You cannot insert a CD and an MD together inside the unit at the same time.
To show the assigned name while the elapsed playing time
appears
Press DISP. Each time you press the button, elapsed playing time and assigned name (see
page 29) appear alternately on the display.
• See also “Selecting the scroll mode” on page 26.
CD OPERATIONS
EN 10-13 KD-MX3000 [J]/F 98.10.19, 6:36 PM10