Filter
Top Products
69
ENGLISH
TROUBLESHOOTING
What appears to be trouble is not always serious. Check the following points before calling a service
center.
Remedies
Adjust it to the optimum level.
Check the cords and connections.
Press the reset button on the
control panel. (Your preset
adjustments will also be erased.)
(See page 2.)
Remove the control panel, wipe
the connectors, then attach it
again. (See page 61.)
Press the reset button on the
control panel. (See page 2.)
If the reset button does not work,
check the installation. (Ex. you
have used a screws which are
longer than specified.)
Store stations manually.
Connect the aerial firmly.
Insert the disc correctly.
• Insert a finalized CD-R/
CD-RW.
• Finalize the CD-R/CD-RW
with the component which
you used for recording.
Unlock the disc. (See page 38.)
While holding
,
press 0 (eject) for more than 2
seconds to eject the disc.
Stop playback while driving on
rough roads.
Change the disc.
Check the cords and
connections.
Insert a disc into the loading slot.
Insert the disc correctly.
Causes
The volume level is set to the
minimum level.
Connections are incorrect.
The built-in microcomputer
functions incorrectly due to
noise, etc.
The control panel is not attach
correctly and firmly.
There is something is blocking
the control panel movement.
Signals are too weak.
The aerial is not connected
firmly.
Disc is inserted upside down.
CD-R/CD-RW is not finalized.
Disc is locked.
The CD player may function
incorrectly.
You are driving on rough roads.
Disc is scratched.
Connections are incorrect.
No disc in the loading slot.
Disc is inserted incorrectly.
Symptoms
• Sound cannot be heard
from the speakers.
• This unit does not work at
all.
• “Panel Connect Error”
appears on the display.
• When “Reset P00” to
“Reset P44” appears on the
display.
• SSM (Strong-station
Sequential Memory)
automatic preset does not
work.
• Static noise while listening
to the radio.
• Disc cannot be played back.
• CD-R/CD-RW cannot be
played back.
• Tracks on the CD-R/
CD-RW cannot be skipped.
• Disc cannot be ejected.
• Disc cannot be recognised
(“No Disc,” “Loading Error,” or
“Eject Error” flashes on the
display.)
• Disc sound is sometimes
interrupted.
• “No Disc” flashes on the
display.
Disc Playback
General
Tuner
EN69-73_KD-LHX601[E_EX].p65 04.1.15, 2:36 PM69