Filter
Top Products
8
Canceling the display
demonstrations
If no operations are done for about 20 seconds,
display demonstration starts.
[Initial: DEMO ON] —see page 20.
1
2
3
4
Finish the procedure.
To activate the display demonstration
In step 3 above...
Setting the clock
1
2 Set the hour and minute.
1 Select “CLOCK HOUR,” then
adjust the hour.
2 Select “CLOCK MINUTE,” then
adjust the minute.
3 Finish the procedure.
To check the current clock time when the
power is turned off
EN06-11_KD-G814[UI]f.indd 8EN06-11_KD-G814[UI]f.indd 8 1/26/05 3:58:40 PM1/26/05 3:58:40 PM