Filter
Top Products
18
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
2
Indication pattern changes as you
adjust the fader or balance.
Ex.: When “FAD” is selected
Indication To do: Range
FAD*
1
(fader)
Adjust the front
and rear speaker
balance.
R06
(Rear only)
to
F06
(Front only)
BAL
(balance)
Adjust the left
and right speaker
balance.
L06
(Left only)
to
R06
(Right only)
LOUD
(loudness)
Boost low and
high frequencies
to produce a
well-balanced
sound at low
volume level.
LOUD ON
LOUD OFF
WOOFER*
2
Adjust the
subwoofer
output level.
00 (min.)
to
08 (max.)
VOL*
3
(volume)
Adjust the
volume.
00 (min.)
to
30 or 50
(max.)*
4
*
1
If you are using a two-speaker system, set
the fader level to “00.”
*
2
This takes effect only when a subwoofer is
connected.
*
3
Normally the control dial works as the
volume control. So you do not have to select
“VOL” to adjust the volume level.
*
4
Depending on the amplifier gain control
setting. (See page 21 for details.)
EN18-23_KD-G814[UI]f.indd 18EN18-23_KD-G814[UI]f.indd 18 1/26/05 3:59:20 PM1/26/05 3:59:20 PM