Filter
Top Products
65
REFERENCES
ENGLISH
Symptoms Remedies/Causes
iPod playback
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• Charge the battery.
• The sound is distorted. Deactivate the equalizer either on this unit or the iPod.
• “Disconnect” appears on the monitor. Check the connecting cable and its connection.
• Playback stops. The headphones are disconnected during playback. Restart
playback.
• “No Files” appears on the monitor. No tracks are stored. Import tracks to the iPod.
• “Reset 01” – “Reset 07” appears on the
monitor.
Disconnect the adapter from both this unit and iPod. Then,
connect them again.
• “Reset 08” appears on the monitor. Check the connection between the adapter and this unit.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
• “Restricted Device” appears on the monitor. Check whether the connected iPod is compatible with this
unit. (☞ page 59)
• No operations are available while playing
back a track containing artwork.
Operate the unit after the artwork is loaded. (☞ page 59)
CD changer
• “No Disc” appears on the monitor. Insert a disc into the magazine.
• “No Magazine” appears on the monitor. Insert the magazine.
• “Cannot play this disc Check the disc” appears
on the monitor.
Disc does not include playable files. Replace the disc with
playable files.
• “Reset 08” appears on the monitor. Connect this unit and the CD changer correctly and press
the reset button of the CD changer.
• “Reset 01” – “Reset 07” appears on the
monitor.
Press the reset button of the CD changer.
• The CD changer does not work at all.
Reset the unit. (☞ page 3)
DAB tuner
• “No DAB Signal” appears on the monitor. Move to an area with stronger signals.
• “Reset 08” appears on the monitor. Connect this unit and the DAB tuner correctly, then reset
the unit. (☞ page 3)
• The DAB tuner does not work at all. Connect this unit and the DAB tuner correctly, then reset
the unit. (☞ page 3)
• “Antenna Power NG” appears on the monitor. Check the cords and connections.
AV-IN
• No picture appears on the monitor. • Turn on the video component if it is not on.
• This unit is not connected to the video component
correctly. Connect it correctly.
• The playback picture is not clear and legible.
Adjust items in <Picture Adjust>. (☞ page 49)
EN_KD-AVX22[E]3.indb 65EN_KD-AVX22[E]3.indb 65 08.1.23 6:45:45 PM08.1.23 6:45:45 PM