Filter
Top Products
59
REFERENCES
ENGLISH
– Through the interface adapter
• iPod with dock connector (3rd Generation)
• iPod with Click Wheel (4th Generation)
• iPod mini
• iPod photo
• iPod nano
• iPod video (5th Generation)
*
To watch the video, connect the iPod using USB
Audio and Video cable (not supplied).
• If the iPod does not play correctly, update your iPod
software to the latest version. For details about
updating your iPod, visit <http://www.apple.com>.
• When you turn on this unit, the iPod is charged
through the unit.
• While the iPod is connected, all operations from the
iPod are disable. Perform all operations from this
unit.
• The text information may not be displayed correctly.
• The text information scrolls on the monitor. This
unit can display up to 40 characters when using the
interface adapter and up to 128 characters when
using the USB 2.0 cable or USB Audio and Video
cable.
USB
• If “No USB device“ appears after removing a device,
reattach a device or select another playback source.
• When the USB device has no playable files, or has not
been formatted correctly, “Cannot play this device
Check the device” appears on the monitor.
• The unit cannot recognize a USB device whose rating
is other than 5 V and exceeds 500 mA.
• While playing from a USB device, the playback order
may differ from other players.
• This unit may be unable to play back some USB
devices or some files due to their characteristics or
recording conditions.
• USB devices equipped with special functions such as
data security functions cannot be used with the unit.
• Do not use a USB device with 2 or more partitions.
• Depending on the shape of the USB devices and
connection ports, some USB devices may not be
attached properly or the connection might be loose.
• When connecting a USB device, refer also to its
instructions.
• Connect only one USB device to the unit at a time. Do
not use a USB hub.
• This unit may not recognize a USB device connected
through a USB card reader.
• When connecting with a USB cable, use the USB 2.0
cable.
• This unit may not play back files in a USB device
properly when using a USB extension cord.
• This unit cannot assure proper functions or supply
power to all types of the devices.
• This unit can recognize a total of 5 000 files and 250
folders (a maximum of 999 files per folder).
• This unit can recognize a total of 25 characters for
file/folder names.
• For MPEG1/2 files: The maximum bit rate for video
signals (average) is 2 Mbps.
iPod operations
• You can control the following types of iPods:
– Through the USB 2.0 cable
• iPod video (5th Generation)
*
• iPod nano
• iPod nano (2nd Generation)
Notice:
When operating an iPod, some operations may not be
performed correctly or as intended. In this case, visit
the following JVC web site:
– For the USB connection: <http://www.jvc-victor.
co.jp/english/car/>
– For the interface adapter connection: <http://
www.jvc.co.jp/english/car/support/ks-pd100/
index.html>
DAB tuner
• Only the primary DAB service can be preset even
when you store a secondary service.
For the USB connection:
When <iPod Artwork> is set to <On>:
Do not press any keys during the first 30 seconds or
more of playing back any track containing artwork*.
It takes 30 seconds or more to display artwork and no
operations are available while loading it.
* The picture displayed on the iPod’s screen while
playing back a track.
EN_KD-AVX22[E]3.indb 59EN_KD-AVX22[E]3.indb 59 08.1.23 6:45:43 PM08.1.23 6:45:43 PM