JVC RX-6040B Stereo System User Manual


 
22
English
For RX-6040B/RX-6042S:
1DVD 2CD 3TV 1DVD 2CD 3CDR
1DVD 2CD 3VCR 1DVD 2TV 3CDR
1DVD 2TV 3VCR 1DVD 2CDR 3VCR
1CD 2DVD 3TV 1CD 2DVD 3CDR
1CD 2DVD 3VCR 1CD 2TV 3CDR
1CD 2TV 3VCR 1CD 2CDR 3VCR
1TV 2DVD 3CD 1TV 2DVD 3CDR
1TV 2DVD 3VCR 1TV 2CD 3CDR
1TV 2CD 3VCR 1TV 2CDR 3VCR
1CDR 2DVD 3CD 1CDR 2DVD 3TV
1CDR 2DVD 3VCR 1CDR 2CD 3TV
1CDR 2CD 3VCR 1CDR 2TV 3VCR
1VCR 2DVD 3CD 1VCR 2DVD 3TV
1VCR 2DVD 3CDR 1VCR 2CD 3TV
1VCR 2CD 3CDR 1VCR 2TV 3CDR
(back to the beginning)
For RX-5040B/RX-5042S/RX-5045B:
1DVD 2CD 1DVD 2TV 1DVD 2CDR
1CD 2DVD 1CD 2TV 1CD 2CDR
1TV 2DVD 1TV 2CD 1TV 2CDR
1CDR 2DVD 1CDR 2CD 1CDR 2TV
(back to the beginning)
Setting the Component Video Input
This setting is only for RX-6040B/RX-6042S.
When you use the component video inputs for connecting the DVD
player and/or VCR, register the type of input jacks.
If you have not selected appropriate video input jacks, the AV
COMPU LINK remote control system cannot operate properly. (See
page 31.)
For the DVD player—VIDEO IN DVD
Select one of the following:
DVD COMPONENT: Select when connecting the DVD player
to the component video input jacks.
DVD S/C: Select when connecting the DVD player to the
composite video or S-video input jacks.
For the VCR—VIDEO IN VCR
Select one of the following:
VCR COMPONENT: Select when connecting the VCR to the
component video input jacks.
VCR S/C: Select when connecting the VCR to the composite
video or S-video input jacks.
Notes:
This function does not take effect in the following cases:
While playing an analog source,
While selecting any of DSP modes (see page 28), or one of the
fixed digital input mode—“DOLBY DIGITAL or DTS
SURROUND (see page 14), and
While listening with the headphones—“HEADPHONE or
3D H PHONE (see pages 13 and 26).
If you select another Surround mode or DSP mode (or deactivate
the Surround/DSP mode) manually, Auto Surround, if in use, will be
canceled temporarily for the currently selected source.
Auto Surround setting will be restored in the following cases:
When you turn the receiver off and on,
When you change the source,
When you change the analog/digital input, and
When you select AUTO SURR ON again.
Virtual Surround Back—VIRTUAL SBACK
You can enjoy the surround back channel while playing back
Dolby Digital EX software or DTS-ES software without the
surround back speakers. This function creates the great surround
effect from the behind as if you have connected the surround
back speakers.
Select “VRTL SB ON” to activate Virtual Surround Back.
VRTL SB ON: While you play Dolby Digital EX software or
DTS-ES software, the VIRTUAL SB (Surround Back)
indicator lights up.
VRTL SB OFF: Select to deactivate Virtual Surround Back.
Notes:
When you have set NONE for SURR SPEAKERS, this function is
not available.
While playing back DTS-ES Matrix software with DTS 96/24, DTS
96/24 processing will not be performed with Virtual Surround Back
activated. To apply the processing, deactivate Virtual Surround
Back.
Virtual Surround Back may not be applied to some software.
Setting the Digital Input Terminals
When you use the digital input terminals, register which components
you have connected to the digital input terminals.
Digital Input terminal—DIGITAL IN
Set the components connected to the digital terminals.
As you rotate MULTI JOG, the digital input terminals are set
to used for the following digital components:
Basic Settings
18-22_5040&6040[C]f.p65 1/13/04, 7:25 PM22