JVC RX-6040B Stereo System User Manual


 
10
English
DIGITAL IN
DIGITAL 1
(DVD)
DIGITAL 2 (CD)
DIGITAL 3 (TV)
Digital Connections
By connecting the receiver and the source component through the
digital terminals, sound reproduction quality will be much improved.
In addition, you can enjoy multi-channel reproduction and some
other convenient functions.
IMPORTANT:
When connecting a video component using the digital
terminals, you also need to connect it to the video jacks on
the rear. Without connecting it to the video jacks, you can
view no playback picture.
After connecting the components using the DIGITAL IN
terminals, set the following correctly if necessary.
Set the digital input (DIGITAL IN) terminal setting correctly.
For details, see Setting the Digital Input Terminals on
page 22.
Select the digital input mode correctly. For details, see
Selecting the Analog or Digital Input Mode on page 13.
Notes:
When shipped from the factory, the DIGITAL IN terminals have
been set for use with the following components:
DIGITAL 1 (coaxial): For DVD player
DIGITAL 2 (optical): For CD player
Only for RX-6040B/RX-6042S:
DIGITAL 3 (optical): For digital TV broadcast tuner
When you want to operate the CD player or CD recorder using the
COMPU LINK remote control system (see page 30), connect it also
as described in Analog Connections (see page 7).
When you want to operate a DVD player or TV using the AV
COMPU LINK remote control system (see page 31), connect it also
as described in Analog Connections (see pages 8 and 9).
Connecting the Power Cord
Before plugging the receiver into an AC outlet, make sure that all
connections have been made.
Plug the power cord into an AC outlet.
Keep the power cord away from the connecting cables and the
antenna. The power cord may cause noise or screen interference.
Note:
The preset settings such as preset channels and sound adjustment
may be erased in a few days in the following cases:
When you unplug the power cord.
When a power failure occurs.
CAUTIONS:
Do not touch the power cord with wet hands.
Do not pull on the power cord to unplug the cord. When
unplugging the cord, always grasp the plug so as not to
damage the cord.
Digital input terminals
You can connect any digital components having coaxial or optical
digital output terminal.
Digital coaxial cable (not supplied)
between digital coaxial terminals
Digital optical cable (not supplied)
between digital optical terminals
Before connecting a digital
optical cable, unplug the
protective plug.
When the component has a digital
optical output terminal, connect it to the
DIGITAL 2 (CD)or DIGITAL 3 (TV)
for RX-6040B/RX-6042Sterminal,
using a digital optical cable (not
supplied).
When the component has a digital
coaxial output terminal, connect it to
the DIGITAL 1 (DVD) terminal, using a
digital coaxial cable (not supplied).
Getting Started
01-10_5040&6040[C]f.p65 1/13/04, 7:12 PM10