Filter
Top Products
5
1 Take off the ear pad of the right
headphone.
2 Take off the battery covers.
3 Install the batteries.
Match the polarity (+ and –) on the batteries
with the + and – marking on the battery
compartments.
• Insert the – terminal of the battery at
first.
Be sure to use the supplied exclusive
battery. Do not use any other
rechargeable or dry cell battery, which
may cause malfunctions or damage
the unit.
Battery installation
4 Put on the battery covers.
5 Put on the ear pad.
1 Insert the hem of the ear pad into the slit
on the headphone.
2 Turn the ear pad anticlockwise to slide
all the hem into the groove on the
headphone.
• Be sure that all the hem is inserted fully.
If not, turn the ear pad anticlockwise
again until all the hem slides in.
HAW600RF_B.indb 5HAW600RF_B.indb 5 06.6.26 6:08:38 PM06.6.26 6:08:38 PM